Reelmagik 6" Review

[JacksonLiam]

Hey guys...I received my reelmagik prosthetic yesterday.  I purchased the 6" version.  I ordered August 1st and received it January 3rd.  The reason for the long turnaround was due to the Halloween season as the bulk of their business is Halloween masks etc.  Though occasionally I would get annoyed, I appreciate their unwillingness to waver the quality to put  out product quickly.  So, just keep in mind that it will take a while to receive so plan ahead....but its totally worth it.

As for the cock itself...it looks and feels real.  My girlfriend was just amazed at the realism.  I put it on according to the instructions and I can say it wouldn't exactly pass close inspection as the tab was visible.  But keep in mind I'm a novice.  I think once I get used to the application process, I'll get better and it will look better.

Now for the good stuff...we did try it out.  Both vaginally and anally and she loved all of it.  She says the length is perfect as to not hit too deep and the girth feels great.  It's on the bigger side but I don't think it's scary big.  And it feels good from my point of view as well...it has a small indention where your junk goes and that feels great.

Also, as for everyday packing in your pants...it's pretty discreet unless you're wearing tight skinny jeans...then you look like you are packing serious heat...and in some instances that is awesome, but I won't be wearing it to work or to my parents per se.  Just out of personal comfort.  And like I said it's variable based on pant selection.  Ill take some pictures and post here....

IMO, I would say out of all the ones I've seen, Reelmagik is the most realistic.  I do think they are worth the money.  Now, this is a review based on new purchase.  Ill revisit the review in 6 months or so to see the longevity of the product. 

Thanks guys, and Ill answer any and all questions....
Jack

[Darrin Scott]

So I take it it didn't come off during sex? That would be my concern. I saw a youtube video of a review of the reelmagik and it also worked for sex for that dude, but some people said because the tab was flimsy it would come off.

[JacksonLiam]

For me, it didn't come off...and we have quite vigorous sex.  I found that parts of it would come undone a bit...the lower sides beside the balls...but the top tab stayed firmly attached.  I will say occasionally I would think it was coming off...but just kept at it.  Wanted to give it a good test run.  Now, it had been glued on for a good 4 hours.  I think it might peel off if it were newly glued.  I'm going to do more research on using medical adhesive and the limitations of it.  If I find anything relevant, Ill let you guys know.

[Sharky]

Did you get the detailed paint job? Hair? Would you post pics?

[JacksonLiam]

Sharky, yes I received the whole package.  The hair is pretty close, though not exact.  And it's seems a wee bit fragile as far as sticking to the glue and pulling out a bit. And I will post pics as soon as I research how to.  If you would prefer I can email some...as I wouldn't feel comfortable posting some of them.  Even though they aren't meant to be pornographic, I know people are curious as to how it looks erect, etc. 

[Finn642]

Awesome review!

I'd love to see some pics, the info was awesome and anything else you have to say or find out after wearing it for a while is always helpful!

I ordered a 4.5" model on august 21, so i'm trying to figure out when i'll receive it. I don't know if you mind telling me what your order # was, i'm 052.
I was originally told it would take 10-14weeks, then their page switched order numbers 46-60 to 14-18 weeks (the site still hasn't changed this). then in mid-November i was sent an email that said i would reach the production stage soon and they apologize for the wait during the halloween season etc... that was over a month ago and we are now 19 weeks in and i haven't heard anything more.

I considered emailing them but I understand why this is a slow process and I really don't mind waiting I just want to know where in line I'm at.

So if you don't mind telling me your order number that would be awesome 

[JacksonLiam]

Hey Finn, I believe my number was #3 or #7....I ordered on August 1st.  So as you can see they obviously got a lot of orders between mine and yours.  I know it gets frustrating but they were very communicative and honest.  And it is sooo worth it.
As for pictures...I would post some, but I don't know what the guidelines are for posting such photos.  If anyone knows, enlighten me.  I mean, I read that pornographic photos are prohibited...but...given the subject matter at hand, I don't know if they would be considered pornographic. 
And also, I tried to post some clothed pictures in HTML and it didn't work...if anyone knows how to post pics directly to the forum, please educate me. 
Thanks.

[Finn642]

#3 or #7 

wow I hope there is some kind of miscommunication with the production times, I honestly don't mind waiting a year (which, if they are on order #3 and it's taken 6 months to get to, is being hopeful at best) but if it's going to take THAT much time I wish they'd tell me:

http://www.reelmagik.com/REELMAGIK/ORDER_PRODUCTION_PAGE.html

at #3-7 you should have gotten it within the first month or so... some time in September. unless they didn't even start any of the medical prosthetics until after the halloween season... but even still they'd be on week 9 or 10 by now which according to their page would be orders 16-30. Which would mean they only made 3 in over 2 months... this is me just being pessimistically hypothetical tho so basically I have no clue where they are at with production times. And if I'm right about them starting after the halloween season then I don't see why they'd give you how many weeks it will take to make without a start date to go by (I was going by the day I got a confirmation from them about my order being placed and was given an order number).

they also say that orders between august15 and october31 may take up to 3 weeks longer, i assumed this was calculated into their estimates but now I have no idea how long this is going to take.

I think I'll E-mail them, all i want is an honest time frame estimate I don't care if that estimate is next year I just want to know.



sorry, I don't know how to upload pics either. But again thanks for the review and I'm happy to hear your pleased with your order, if it takes forever thats fine with me so long as its great in the end.

[JacksonLiam]

I think those production times changed in September or October.  And they didn't take any prosthetic orders all of September and October so I think there was a serious backlog of orders plus their normal Halloween type stuff...so I think if you ordered before the new production timeline, it might not be as accurate.  Essentially it took 5 months for mine from order to receipt.  But once again, this was during their peak season.  After I received my email that mine was in production, I got it 5 weeks later.  So maybe that helps alleviate some questions.  But they are very good at returning emails and communication.  I tried to keep in touch around 1x a month...just to make sure my order wasn't getting lost in the mix which of course it didn't. 
Oh, one thing I forgot to mention in my review...I would strongly suggest the extra strength glue.  That's what I ordered and even it isn't perfectly steadfast....but it works and to be honest....I wouldn't want anything attached to my junk with anything stronger...that would just be scary.

[Finn642]

still completely lost in how long this may take but thanks for the info.

i got an email in mid november saying mine would reach production soon:

"A good deal of our current orders are quickly approaching the original estimated time for completion, and we wanted to give you an update on your order.  Your Medical Prosthetic order is still in process, and according to your number in line you should be approaching production status in the near future."

and at the bottom of the email

"We appreciate your patience and understanding, and ask you to bear with us a little longer.  We will notify you once your order has reached the production stage and shipped."

I assumed from this email i would get an email shortly after telling me i'd reached production status and that it would be shipped, i assumed, within a week or so of that email. I havent gotten anything else and its been over a month.

anyway i'll email them and ask, i've avoided emailing them except to thank them for their emails since they said somewhere on the site that emails will only slow them down. but if they have been helpful to you i'll see what they have to say about a time frame.

We have glue we ordered from a previous lolajake so we'll be testing that out on the reelmagik, the glues been fine in the past so hopefully it will be ok here 2, if not i'll order the extra strength glue. thanks again!

[supremecatoverlord]

Jackson, I think people might have been asking for people to see a picture of the product, just not you packing it. There's a lot of packers out there that can look realistic in your pants that don't cost 400+ dollars, but might not necessarily look so real once taken out. I think this is why Sharky questioned as to whether or not you would be willing to post pics. :3

[JacksonLiam]

Color M5 with light brown hair



Back of prosthetic

[JacksonLiam]

Ok, here's a more representational one...hope it doesn't get reported.  And keep in mind, this pic is from my first time putting it on, I'm sure it will get better and look better with trial and error.

Close up attached without showing tab...showing realism with skin tone against thighs

[Finn642]

WOW that looks awesome! 

Very realistic, especially the last pic.

I'm sure with some practice you can hide the tab a bit better but besides that it looks legit. So awesome!

[MaxAloysius]

Amazing! Thanks so much for the review and pics!

[Adio]

Thanks so much for the review!  While I'm still hoping to purchase the smaller one, this is definitely helpful.  Thanks for including the packing pictures.  I wish more people showed those because that's what most people are going to see in an everyday situation!

The detailing looks great and I'm glad to see an example of the light brown hair; that's definitely the kind I need.  I have a question about the coloring though.  It might be the lighting, but it seems as if your skin tone is darker than the prosthetic.  Do you like the color/shade as it is now?  If you could order it again, would you chose the same one or something different?

Thanks again, Jack!

[JacksonLiam]

Thanks everybody, glad I could help.  Actually some threads on this forum helped in my decision in going with reelmagik. 
And Adio, I feel comfortable with the coloring, I do think the picture is off a bit.  The only color I could think that could also work was if it were a deeper red shade, but generally that indicates a phallus that is erect, so I'd prefer not to look like that 24/7 (even if I do feel that way, lol)  I wanted it as closed to my thigh shade as I could pick out from a printed paper of colors.  I am a fair skinned gentleman and was worried I'd get it too dark or the tint would be off and it might not look right for my skin tone. 
Oh and another thing...I emailed Reelmagik a question and Jesse replied withing 12 hours.  Their customer service is just exceptional.

[Adio]

Ah okay, thanks.  I'm also fair skinned so I might end up doing the same (M5) or maybe M6.  Oh, and if you don't mind another question, which adhesive did you get and how much?  Do you feel like the supply will last you very long?  Thanks a lot, man.

[JacksonLiam]

I bought the 1/2 oz xtra strength. And I've adhered and removed it 3 times and no....1/2 oz isn't enough. I probably have only enough to put it on 3 or 4 more times.   In fact...I'm about to buy more, unfortunately.  It's not cheap and I thought about trying to find some somewhere else but this prosthetic was an investment so I don't want to do anything to damage it as they recommend only using their adhesion/removal products.

[elliott]

Thanks for the review mate, I've ordered a 6 inch and it's great to hear such positive feedback, looks like I'll be waiting a while for mine though! In regards to the adhesive, a guy on this website: http://transguys.com/product-reviews/packers has the 6 inch and said to save the adhesive and get the best stick he put a little DAP food safe epoxy adhesive on the tab and that it'd stay on basically as long as he needed it to. It obviously needs some research but just thought I'd offer it as a possibility Thanks for the photos too it looks brilliant!