Converting GV soft pack into an STP and pack'n'play

[emil]

here's a video on how i convert the GV soft pack into an STP and dildo with a travelmate.

http://www.zshare.net/video/76662431a9f906a4/

excuse my bad english and the bad quality of the vid!

edit: for some reason it also seems to play really interrupted on that site, so i will try to upload it to another site 

[Hurtfulsplash]

Thanks, great instructions! I'm surprised how durable the packers are.

[Flan]

I couldn't play it back at all with windows media player, media player classic was glitchy. I converted it to mp4 which fixed video, but there's no audio. :|

[Hurtfulsplash]

Hmm I got it ok without any glitches or interruptions. Hope you get it figured out.

[Roro]

Great tutorial. Very clever! Is that the large or not so large size of the GV packer?

[emil]

thanks it's the large size of the gv soft pack.


i hope this one plays better:
packertutorial.avi - 57.97MB

(sorry, the program i used for changing the format put that stupid watermark there and sort of pixelized the video)

[Flan]

I'll try it again (thanks)

edit: still no audio, i'll try to convert again shortly
as far as transcoding video, I recommend either avidemux or handbrake (the latter more user friendly, the former more powerful)

http://handbrake.fr/
http://avidemux.razorbyte.com.au/

[emil]

it should actually be streaming on that site i linked 

[rexgsd]

would it look normal actually packing with the stp device in it?
i mean obviously it makes it more stiff, it seems like it might look ridiculous packing,
how can you pack it so it looks normal?
sorry if that was a confusing question, lol, just wondering though.

[rexgsd]

okay cool thanks.
i was wondering that about the four inch
would you need a different/smaller stp device then?

or does the end of the stp not really dig too much to be annoying in what you use?

[emil]

i think you might have to cut off the tip of the travelmate, or else the end that's sticking out of the top end of the packer will be a little longer. i dont think it would be much of a problem.

[rexgsd]

ok that makes sense

thanks so much for that video and your help! i think  i will definitely have to try this once i am able to start to pack!

[Flan]

turns out the problem was with my system >.<
I re-encoded it anyways and took the liberty of getting rid of the blue tint and sharpening it.

http://www.megaupload.com/?d=BOFL0NCT

[emil]

hey thanks! glad you were able to watch it in the end.(the ones i posted are actually closer to the real coloring of the packer and travelmate, in case anyone is wondering - the travelmate is bright blue)

[madzam]

Inventive....Only thing is I don't have a travelmate and when I just used a medicine spoon it hurt a lot when I was walking around with is as an stp.

But great video!

[Tad]

hmm just ordered the stuff to make this.. I'll see how it goes.

[Tad]

Hey emil.. I got everything in and built it up last night.

Have a few questions..
How often do you pull out the travel mate and give the thing a thorough washing?
What's the average life span of the gv packy using it as a stp and all?
And.. wear on the packer.. where it's not completely smooth but the cyberskin is a little  umm rough and worn.. is that normal?

[emil]

you could pull out the travelmate and wash the whole thing every day ...i do it like every other day. then towel-dry and dust in baby powder.
average life span of when used as an stp: i'm not sure, but i would say half a year at the least. when used to play, it kind of depends. if you make sure the funnel is in the very middle of the balls and don't push super super hard, it will last quite a while...the damages that might happen are: funnel pushed down and out through the back of the balls (happened to me once, girl on top, rough situation, can be avoided by making sure the funnel goes through the middle of the balls) or the tip of the travelmate being pushed through the packer and thus tearing in another hole in the front (happened to me once during sex but i'm not sure what caused it).

does the cyberskin look rough and worn on the inside of the packer or on the outside?  the first time i built the thing, mine looked rough on the inside, too, because i didn't make the hole exactly where the silicone rod was...but the packer still lasted really long, so that shouldn't be a problem. if there's still pieces of silicone sticking to the packer on the inside, you should clean those off.

[Tad]

outside of the packer.. not the inside.. came that way :/

[emil]

hum okay then that's not normal i fear     mine came in a plastic box and were very bright and fragile looking so i always dust them in powder right away (seems to help to prevent wear and tear)