Susan's Place Logo

News:

Please be sure to review The Site terms of service, and rules to live by

Main Menu

Recent posts

#1
Member Blogs / Re: Courtney's life begins her...
Last post by Jenn104 - Today at 08:46:14 PM
Quote from: Courtney G on Today at 08:07:46 PMThank you, Jenn. I totally agree. You know, you're on my short list of people from here who I'd like to hang out with!!


Hey Courtney  - come hang out here in the halloween capitol of the universe. Seriously-- we should figure out a weekend.

~Jenn
#2
Introductions / Hey everyone!
Last post by FinallyTrans - Today at 08:31:32 PM
Hi all! After many years of holding back, I've finally decided to come out as a trans woman. It's not left my mind since I was like 10, and it's time to be myself finally. I told my therapist this week and it felt like such a weight lifted.

I am married, for almost 10 years, so next step is coming out to my wife. I have no idea how she will take it, I'm hopefully but readying myself for anything. I kept this in because I always worried how she would feel about me lying all of these years. I also have kids, but they are young enough to not hate me for this!

I have always felt like a "Norah", so already settled on that name. Idk why!! But anyway, I'm hoping to meet some friends here, listen to stories, and get some advice as I move forward with my transition.

Any advice is appreciated!!
#3
Passing / Re: Subtle Cues: Body Language
Last post by Jessica_K - Today at 08:17:47 PM
In one respect it's easier if it did not work, add more bypass etc, but this is power good issue. All LDO's with a power good output that I have ever worked with have a protection diode to vin so the pull-up is connected there,

The device chosen seems to have the protection diode to vout so the PG signal cannot be higher than the output. In this case, the regulator produces 1.2V but a PG of 1.2V is not enough to enable the next stage, in fact it's worse than that, I have it connected as usual to Vin and then the diode conducts so the PG is only 1V instead of 3.3V. The spec does not say this, just that it's the usual open drain output. I have inferred all this by observation. it's useless.

Attempting to bypass the PG is a mare as apart for 0.5mm of track it's all on inside layers. We do not have a trained wireman, so I am attempting to do it myself, and it's way above my confident skill set. After I have proved the solution I can send the board back to the manufacturer that do have such wireman.

I have to do everything. Design, layout and repair/rework. I have one software test engineer that is a bit handy with a soldering iron but he said he would not touch the board with a bargepole lol. And management is panicking and losing confidence in me, not alowing me to change the device for the next iteration without proof of working. If I had to do this for every part of the design it would taken years to build the design bit by bit, and cost astronomical. The boards cost about £10k to build as prototypes.

Going back to the initial question, confidence is everything and for all the successes I have, one error and it all goes tumbling down.

Also the company wants everything, pimping me out to other companies to get revenue to offset my salary instead of just having me as a R&D resource. And these issues are the consequences of only allowing me to work for 2 days a week on this very complex PCB and off to Teledyne to work on their projects for 3 days. I always have to generate revenue instead of being a capital expense, generating income when they sell the PCB's. 
#4
Member Blogs / Re: Courtney's life begins her...
Last post by Courtney G - Today at 08:07:46 PM
Quote from: Gina P on May 05, 2024, 07:35:21 AMGreat to see your beautiful face posted and no 'face app' logo. Amazing how far you have come sister. Looking great.
Hugs Gina

Thanks, hon. I wish I was where you're at, but I am what I am (Popeye).

Quote from: Jenn104 on May 05, 2024, 04:46:44 PMHey! I am super happy you have a support network. I am happy for all of you.

No one does this alone. thanks for the update.

~Jenn

Thank you, Jenn. I totally agree. You know, you're on my short list of people from here who I'd like to hang out with!!
#5
Member Blogs / Re: Courtney's life begins her...
Last post by Courtney G - Today at 08:04:17 PM
Quote from: LoriDee on May 04, 2024, 10:22:55 PMLooking good, Courtney!

I'd like to know about the carbon dye you use. I have two IPL machines that I have used on my legs, but with a gray beard, it didn't work. I am like you that I get so frustrated shaving only to have whickers pop through. I was advised once to use concealer with a pink tint to cover the shadows. I found that a light touch of pink lipstick works, then use a sponge to work it into the area and spread it out so it blends in. Dyeing the whiskers to use the IPL is something I considered, but I didn't think it would get deep enough into the follicle to work. Please share your wisdom oh great wise sister.


Sorry for the delayed reply. Thank you! And thanks for the tip regarding the pink lipstick! I'd read about carbon dye as a solution for grays, so I'm giving it a try but the jury is still out as to whether it will be effective. I'm waxing as much of my face as I can tolerate (it hurts) then shaving very closely, then applying the dye to my skin, wiping the surface dye off with alcohol. The idea is that some dye will find its way into the root where it will absorb the heat from the IPL. It's also possible that the hairs I didn't extract by waxing will get a little dyed and will also get the zap.

I'll try it this way for a couple more months (about once every 10 days, as time allows) and see if I continue to get a reduction in facial hairs. It's a pain because I have to let my whiskers grow for at least a week in order to get enough for waxing (they grow slowly these days). So it's going to be some time before I can report back regarding the effectiveness.

For me, those facial hairs seem to come screaming through the foundation - it's a real dysphoria trigger - they're all I seem to focus on, sometimes. I've had several electrolysis sessions, but the cost really adds up, as you know!
#6
Member Blogs / Re: Rachel Montgomery Wanderin...
Last post by Courtney G - Today at 07:58:28 PM
It's good to hear from you, Rachel. I'm glad you're doing well. Sorry that you can't express your gender the way you'd like, but I'm so happy you've found an acceptable way to redirect that energy.
#7
Birthdays / May 08, 2024 - Birthdays - Mem...
Last post by Northern Star Girl - Today at 07:36:51 PM
@ErinWDK   @Raye   @Empty Miroir

Dear Members:
  4 members Birthdays to recognize on May 08, 2024
    Wishing each of you a very Happy Birthday
          :icon_flower:  :icon_birthday:  :icon_birthday:  :icon_birthday:  :icon_flower:

What are your plans for your Birthday? 
        Dinner out with friends and family?
            Cake?  Candles?  Special trip?


On your Birthday, check your profile for a special gift...

    Again, wishing you well and enjoy your special day.
Warm Regards,
Danielle
[Northern Star Girl]
                 
#8
Introductions / Re: Nice to meet everyone
Last post by Maid Marion - Today at 07:34:21 PM
Hi Lilith,

Welcome!

I also don't fit neatly into the usual gender binary.

Even when I grew a full beard I'd often "male fail" when socializing  in public.
Once I learned to properly modulate my voice I'd drive the telemarketers crazy because I didn't sound like the gender they were expecting!

I still go by my assigned name at birth so there can be confusion when ordering takeout
but I live where people are very accepting. 

Marion
#9
Birthdays / Birthday Celebrations - Member...
Last post by Northern Star Girl - Today at 07:26:12 PM
    @SorchaC  @Monica  @Seven 
@BMTH  @ReubenIsTheName  @Wolfy


Dear Members:
Your special day has arrived ... May 09, 2024...

                    HAPPY BIRTHDAY
          :icon_flower:  :icon_flower: :icon_birthday:  :icon_birthday:  :icon_birthday:  :icon_flower:  :icon_flower:

Trusting that your Special Day will bring you cake? candles? gifts? 
      and good times with friends and family.

Be certain to look at your profile on your Birthday to find a special gift !

Best wishes to you.

Warm Regards,
Danielle
[Northern Star Girl]
                   

#10
Introductions / Re: Nice to meet everyone
Last post by Northern Star Girl - Today at 06:59:58 PM

@Lilis
Dear Lilis:

I have noticed that you have just registered today as a new member and
this is your very first posting.
All of us on the Forum are very glad that you found us and that you are now here.

Here on the Forum we have members coming from all backgrounds and with a variety of experiences.


I am wishing you a Warm Welcome to Susan's Place!

I look forward to your involvement on the Forum and reading your
future postings, comments and thoughts.


Please review the LINKS at the end of this message, they include information which will help you to navigate
the site and use the available features. Look especially at the LINKS in RED...
...there are answers to questions that most new members ask.


If after carefully reading all of the information in my mwessage and in the LINKS below, and
you still have more questions regarding how the Forum works, you can contact me
via my private Email
that is shown immediatly following my name below:

Once you reach 15 posts you will be able to send and reply to Forum private messages, also
you will then be able to upload and post your Avatar profile picture.

I will now let you get back to this posted topic... there should be some
additional like-minded members coming along to greet you and to help answer any questions
that you may have.


Warmest Regards,
Danielle
[Northern Star Girl]  E-Mail: alaskandanielle@yahoo.com
The Forum Administrator
Helpful links to information that you should read

            cc: @Sarah B
                  @LoriDee