Susan's Place Transgender Resources

I don't know much about them and thought this would be the best place to ask.

Where can you buy them and how much usually? And are they comfortable? I'm still in school and I'll be walking around a lot (plus, I have P.E.) and just wondering if packers are comfortable (maybe there's a certain kind that's more comfortable than another) to walk around in and stuff?

You can get them from tons of places for tons of prices, I'll run through a few of the more common ones

Mr limpy/ mr packy/ packy/ etc: basically any adult store or trans website, cheapest packer, generally $10-15 (maybe even less) depending on where bought and what size . Comes in four I think, the most common are 3.5 inches and 5.5 inches

Masho: tranzwear, queen cat, amazon, I believe $12-17 but possibly cheaper. This one has 3d balls and is 4 inches

Sailor soft pack/ GV soft pack: good vibes and some other stores like it I think, most trans stores, amazon, $20-25 (maybe as high as 30), 4.5 or 5.5 inches, firm inner core supposedly more realistic

Reel magic basic packer: reelmagik, $80 if I remember correctly, but about $100 or more with shipping, this is basically an inexpensive packer made from a prosthetic mold. It's probably the most realistic packer without going into prosthetic category. 4.5 inches.

As for comfort of different packers, that is totally a personal thing. I've never found it uncomfortable but it can be awkward at first. You may want to look into harnesses for whichever you chose if you'll be wearing it in P.E.

Quote from: CursedFireDean on January 11, 2014, 08:55:44 PM
You can get them from tons of places for tons of prices, I'll run through a few of the more common ones

Mr limpy/ mr packy/ packy/ etc: basically any adult store or trans website, cheapest packer, generally $10-15 (maybe even less) depending on where bought and what size . Comes in four I think, the most common are 3.5 inches and 5.5 inches

Masho: tranzwear, queen cat, amazon, I believe $12-17 but possibly cheaper. This one has 3d balls and is 4 inches

Sailor soft pack/ GV soft pack: good vibes and some other stores like it I think, most trans stores, amazon, $20-25 (maybe as high as 30), 4.5 or 5.5 inches, firm inner core supposedly more realistic

Reel magic basic packer: reelmagik, $80 if I remember correctly, but about $100 or more with shipping, this is basically an inexpensive packer made from a prosthetic mold. It's probably the most realistic packer without going into prosthetic category. 4.5 inches.

As for comfort of different packers, that is totally a personal thing. I've never found it uncomfortable but it can be awkward at first. You may want to look into harnesses for whichever you chose if you'll be wearing it in P.E.

Thanks for the info, I appreciate it. I'll probably buy some online and I'll be using a harness as well.

I've heard there are prosthetics out there for using the bathroom as well? Any info on those?

Quote from: Mr Hockey on January 11, 2014, 09:04:35 PM
Thanks for the info, I appreciate it. I'll probably buy some online and I'll be using a harness as well.

I've heard there are prosthetics out there for using the bathroom as well? Any info on those?

Those would be called STPs, and I only know a little about one of them, but hopefully some other guys will post too. The one I know is called the peecock, it comes in three sizes (4.5 inches, 5.5, and 6.5) and starts at $100-something ( I've forgotten the exact price, expect to pay $200 though with shipping)
The peecock is actually a 3-in-1 device so it comes with a rod you put into the STP hole so it's erect. If you google or YouTube "peecock generation 2" you can find tons of reviews of the current one.

There's also lots of packers like the ones I previously mentioned that you can have modified into an STP. Those vary greatly in price and are available at most online trans stores.

Quote from: CursedFireDean on January 12, 2014, 08:35:26 AM
Those would be called STPs, and I only know a little about one of them, but hopefully some other guys will post too. The one I know is called the peecock, it comes in three sizes (4.5 inches, 5.5, and 6.5) and starts at $100-something ( I've forgotten the exact price, expect to pay $200 though with shipping)
The peecock is actually a 3-in-1 device so it comes with a rod you put into the STP hole so it's erect. If you google or YouTube "peecock generation 2" you can find tons of reviews of the current one.

There's also lots of packers like the ones I previously mentioned that you can have modified into an STP. Those vary greatly in price and are available at most online trans stores.

Okay, thanks again for the info. I'll look into them.

The packers have been mentioned so I won't go there, but I highly recommend a jock strap as a harness. Especially with PE, you just don't want to have to worry about the bugger coming loose.

What are things to really avoid when packing though? I've heard lots of people say 'make sure it looks natural' but that's quite hard at times.

Quote from: caleb. on January 12, 2014, 09:25:55 AM
The packers have been mentioned so I won't go there, but I highly recommend a jock strap as a harness. Especially with PE, you just don't want to have to worry about the bugger coming loose.

Yeah I just watched some video reviews on packers on YouTube and I'll definitely use a jockstrap when I have P.E. Don't want to have it come out of my pant leg while I'm running lol.

Quote from: freddie on January 12, 2014, 09:43:04 AM
What are things to really avoid when packing though? I've heard lots of people say 'make sure it looks natural' but that's quite hard at times.

Biggest thing to make sure of IMO is that it isn't placed too high.

Quote from: CursedFireDean on January 12, 2014, 03:20:41 PM
Biggest thing to make sure of IMO is that it isn't placed too high.

Agreed. It should be down near where the...um..."slit" begins. Also try to make sure it doesn't look too...well, round. Lol. I found that problem when using socks, so I bunched them up at the end to make the "balls" and then had the top hanging off to create a more shaft like appearance.

Full disclosure, I look up pictures of guys posing in their underwear (not just models, lol, like your average guy that poses on tumblr porn blogs) if I need reassurance that I'm doing it right.

Quote from: caleb. on January 14, 2014, 05:37:15 PM
Agreed. It should be down near where the...um..."slit" begins. Also try to make sure it doesn't look too...well, round. Lol. I found that problem when using socks, so I bunched them up at the end to make the "balls" and then had the top hanging off to create a more shaft like appearance.

Full disclosure, I look up pictures of guys posing in their underwear (not just models, lol, like your average guy that poses on tumblr porn blogs) if I need reassurance that I'm doing it right.

Good advice, lol.