Anyone else an engineer? :)
I'm working in aerospace manufacturing. Going for my masters in mechy engineering.
Yes! Me! :D Or at least I'm on my way. I'm currently working towards my bachelor's degree in electrical engineering. Actually I was an electrician for seven years before I hurt my back terribly, couldn't find work, and decided to back to school. Now I have two more years of undergraduate work. I would like to eventually get my masters too. There is a pretty decent amount of pre-engineering students where I am (FL) that want to go into aerospace engineering. Seems like it'd be interesting work. Personally, I'm really into sustainable energy sources and electric vehicles. I would really like to work for Tesla Motors after graduating--a little silly dream of mine--we'll see. :)
I spent a bit of time in school for electromechanical technology and robotics but found out anyone working on "robots" spent a LOT of time traveling... Not my cup of tea.
But I can at least say I was in school...
I'm very talented in The Southern Discipline. ;)
*Raises hand* me me!
Currently only a first year at uni, working on a bachelor of electronic/computer engineering and micro electronic engineering.. 4 years full time, was doing physics as well but I'm dropping that by next year since it would have made it 5 years and a lot harder. Don't know exactly what I'll do afterward with the degree, but I've got 3 more years to work that out.
There's about a 20:1 ratio of male to female in engineering at uni, which is unfortunate but will even out a little more once I go full time by next semester.
I'm a Senior Network Engineer with a BS in Computer Science, does that count? My wife is an electrical engineer and I actually do more real engineering than she does!
I'm considering going back to school for a Masters in bioengineering though. Looking at Stanford or Berkeley if I can get in.
Quote from: MayoiNeko on September 24, 2012, 02:47:58 AM
There's about a 20:1 ratio of male to female in engineering at uni, which is unfortunate but will even out a little more once I go full time by next semester.
When I finally decided I was going to transition, I was looking for other m2f engineers. I was a little worried about how I might be discriminated in the field and what kind of career I might actually be able to have as a trans woman, since it has long been a male saturated profession. Personally, I have had no more than five (apparently) cisgendered women in any of my pre-engineering classes. But in my searching, I found Lynn Conway's page. She's a very accomplished m2f electrical engineer. You all may already know of her, but for any that don't, I found her story to be inspiring and her page helpful.
I was a Software Engineer for 13 years.
Quote from: Sadie May on September 23, 2012, 11:40:07 PM
I'm very talented in The Southern Discipline. ;)
Im a graduate of H.I.T.
Hillbilly institute of technology. Aka HIT U ;D
R.F engineering in various formats
P.E in Antenna Mfg 12 years
FCC, CE, Mil Spec , Audio and acoustical reguatory compliance 5 years
Calibration and metrology 5 years. 8)
Ham radio too K4WTN
12 years as a telecommunications engineer.
Rf tech turned Electrical Engineering student here <----
Quote from: Slightly Interested on September 23, 2012, 09:21:33 PM
Anyone else an engineer? :)
I'm working in aerospace manufacturing. Going for my masters in mechy engineering.
I love my engineers, I could not do without them. While the scientists are still discussing the deep meaning of some observation, the engineers are fully busy making the gadget work.
So, yeah, I work mostly with mech and EE. They have their quirkiness though, the other day they were arguing for hours whether you should or should not fill the tank all the way to get better mileage!
One more thing, I love their math, their equations are so simple, :)
Quote from: peky on September 25, 2012, 06:07:55 PM
I love my engineers, I could not do without them. While the scientists are still discussing the deep meaning of some observation, the engineers are fully busy making the gadget work.
Yes, that was me. It was fun when I made somthing work when the Phd's & D.E's couldent.
We hve a sec lang too as we abbr and mis spel everytng :laugh:
Quote from: Joann on September 26, 2012, 08:02:23 AM
Yes, that was me. It was fun when I made somthing work when the Phd's & D.E's couldent.
We hve a sec lang too as we abbr and mis spel everytng :laugh:
It is too bad that you cannot longer sport a calculating ruler on your blouse pocket, :)
I still have my Pickett slide rule.
Quote from: Jamie D on September 26, 2012, 03:49:10 PM
I still have my Pickett slide rule.
I learned about slide rules in history class. ;D
Software Engineer here. Masters in computer science as of June, 8 years professional experience.
Quote from: Brooke777 on September 26, 2012, 04:02:06 PM
I learned about slide rules in history class. ;D
I know how to work an abacus too!
Quote from: Jamie D on September 26, 2012, 04:24:22 PM
I know how to work an abacus too!
Wasnt that invented when you were a kid?
Quote from: Misato33 on September 26, 2012, 04:21:46 PM
Software Engineer here. Masters in computer science as of June, 8 years professional experience.
I'd love to study CS some day. Especially since more than half of my hobbies involve a computer of some sort :)
Alas, I only know crude C/C++ and some scripts. Anything networky for me = ???
Unemployed software engineer here. Also extremely qualified in southern engineering/the proper use of bailing wire and duct tape to fix most problems :P
I'd like to believe I am a rather decent social engineer. *innocent face*
My dad was a rocket scientist for Boeing and worked on many Cold War era secret projects, of course he was also an electrical engineer and worked on numerous "black box" applications for the B-2 bomber towards the end of his career.
Now myself, since we always had an airplane when I was growing up I figured it would be exciting to get into aircraft maintenance, so off I went to get my A&P license and ended up putting in 30 years in the biz working on general aviation light planes and corporate jets of all kinds, the last ten years of that I had my own business doing paint and sheet metal repairs on aircraft in the Seattle area.
Quote from: Brooke777 on September 26, 2012, 04:40:26 PM
Wasnt that invented when you were a kid?
Writing. I had a thing for clay tablets.
Quote from: Jamie D on September 27, 2012, 01:37:57 AM
Writing. I had a thing for clay tablets.
(https://www.susans.org/proxy.php?request=http%3A%2F%2Fvecto.rs%2F1024%2Fvector-of-a-cartoon-moses-carrying-tablets-coloring-page-outline-by-ron-leishman-14233.jpg&hash=20b1df5b173348f5d45ba36365ca2d9b055d4a0f)
If you're looking to get into or back into Software Engineering make sure your JavaScript and HTML5 APIs are up to date. Even at my old manufacturing focused job the JavaScript was pretty intense.
But please please spend time with a book like Introduction to Algorithms too because there is so much more to software than a language. I keep thinking how Graphic Designers are under appreciated. "I know a guy who has Photoshop. He'll make our logo!" Well, there is a growing risk of, "this guy learned JavaScript syntax in his spare time. He can make our web app!" Sure he can too, but there will be no fixing said app nor extending of it.
I mean no offense to those who picked up the tools of software engineering on their own. I can pick up a paint brush too, but I know nothing about the art of using said brush. That's the analogy I'm trying to convey.
I'd rather be in c/c++ or objective-c myself as I have issues with how loose JavaScript is. But, it's currently hard for me to see a software engineering job in the near future that doesn't require JavaScript knowledge at least in part.
Hello, Oompa Loompas of science! ;D
I'm not an engineer (unless you count being certified as a systems engineer), but I work for a bunch of them doing computer aided drafting.