Peecock just announced that they'll be releasing the Peecock 3S at the beginning of September, and I've decided I'm going to order one! I'm super excited, because I've been developing a lot of dysphoria surrounding being forced to sit to pee in the guy's room. And also there is a big crack between the stall door and stall wall which makes me paranoid. But so I've had my eyes on Peecock for a while, and was going to get a 3, but they were out of my skin tone and when I asked they said it was in preparation for releasing the 3S.
So I'm a little torn between the 4.75 inch or the 5.5 inch, but I'm leaning towards the 5.5 right now. I'm definitely going to post a review of it when I get it, I plan on going ahead and indulging in quick shipping.
Definitely indulge in quick shipping since it's international. And splurge on the pleasure kit. I promise it is not a waste of money. I bought the 3 and I enjoy it. Can't pee with it. Packing is decent. Sexy time is A+.
Quote from: ftmax on August 29, 2015, 10:40:14 PM
Definitely indulge in quick shipping since it's international. And splurge on the pleasure kit. I promise it is not a waste of money. I bought the 3 and I enjoy it. Can't pee with it. Packing is decent. Sexy time is A+.
definitely gonna get the pleasure kit, it looks awesome. Good to know it's worth it!
I've been very content with my Gen2 for about two years now, hope you'll enjoy your Gen3S as much! :) If I hadn't been saving up for more realism I'd have bought a newer Peecock without a doubt.
I think I am going to get one of these, they look much more realistic then previous peecocks, plus I have always had my eye on the peecock products I was just waititng to see if they'd come up with anything better and that they did. It looks awesome, I can't wait to order mines.
Quote from: Brandon on August 30, 2015, 02:15:42 PM
I think I am going to get one of these, they look much more realistic then previous peecocks, plus I have always had my eye on the peecock products I was just waititng to see if they'd come up with anything better and that they did. It looks awesome, I can't wait to order mines.
I'd love to hear what you think if you get one, I've had my eyes on their products for a while too. :) I agree about the realism, it's a great improvement over before even if it isn't perfect. And I think they are working on sealing the airbrushing, though from what I've read it sounds like sometimes the heat during shipping compromises the sealer so they don't guarantee that it'll stay.
They released it earlier than I expected, I got the 5.5 inch and 2-4 day shipping so hopefully I will have it by the end of the week to review!
Quote from: CursedFireDean on August 31, 2015, 03:03:59 PM
They released it earlier than I expected, I got the 5.5 inch and 2-4 day shipping so hopefully I will have it by the end of the week to review!
Let me know how it works out, I am gonna order mine but I am trying to figure out how to work this coupon thing that they offered cuz I still don't understand it. I can't wait to get mine though.
Quote from: Brandon on August 31, 2015, 04:48:55 PM
Let me know how it works out, I am gonna order mine but I am trying to figure out how to work this coupon thing that they offered cuz I still don't understand it. I can't wait to get mine though.
I'll definitely make a post with an initial review, I can also PM you if you want? I was hoping to find a coupon code, since shipping ended up being a big splurge, but I couldn't find one :/ Hope you find one though!
You can do both lol and yeah they sent me this thing in a email lol don't mind the girl at the bottom that's my girl and she was messaging me on the Facebook messaging app and I am currently otp with her right know also lol
(https://www.susans.org/proxy.php?request=http%3A%2F%2Fi.imgur.com%2FMmwgcu0.jpg&hash=8aab076895e53c984006ecc36358201edda0668c)
Quote from: Brandon on August 31, 2015, 05:50:42 PM
You can do both lol and yeah they sent me this thing in a email lol don't mind the girl at the bottom that's my girl and she was messaging me on the Facebook messaging app and I am currently otp with her right know also lol
(https://www.susans.org/proxy.php?request=http%3A%2F%2Fi.imgur.com%2FMmwgcu0.jpg&hash=8aab076895e53c984006ecc36358201edda0668c)
Oh man that's a nice discount, enjoy that lol! And congrats on your girl, that's awesome that you're with someone right now!
Quote from: CursedFireDean on September 01, 2015, 08:06:11 AM
Oh man that's a nice discount, enjoy that lol! And congrats on your girl, that's awesome that you're with someone right now!
Lol thanks man to both, I am still confused on how you use it though lmaoo😂😂
Quote from: Brandon on September 01, 2015, 07:46:34 PM
Lol thanks man to both, I am still confused on how you use it though lmaoo😂😂
In the checkout, there should be a spot for coupon code, then click apply changes I think?
I'll be getting one as a tester, it's being shipped right now. I'll post a review soon as I can.
Sent from my SM-G900W8 using Tapatalk
I got my Gen3S yesterday.
It's pretty much very similar to the Gen3, with a bit improved appearance.
unfortunately, the airbrushed painting on mine do start to fade after wash...
the pee hole seem to be smaller than the Gen3 as well, and so the flow is now much slower...
which is a bit problematic for me.
I'm now back to using the Gen3 because of this...
My first peecock was a Gen2S, and then the Gen3.
I would say the Gen3 is definitely better than Gen2S, but Gen3S is very similar to Gen3...
Quote from: Inji on September 08, 2015, 01:09:24 AM
I got my Gen3S yesterday.
It's pretty much very similar to the Gen3, with a bit improved appearance.
unfortunately, the airbrushed painting on mine do start to fade after wash...
the pee hole seem to be smaller than the Gen3 as well, and so the flow is now much slower...
which is a bit problematic for me.
I'm now back to using the Gen3 because of this...
My first peecock was a Gen2S, and then the Gen3.
I would say the Gen3 is definitely better than Gen2S, but Gen3S is very similar to Gen3...
Just got my gen3s finally. I noticed the pee hole seemed a bit smaller, but I haven't had a chance to test out the peeing yet. I'm gonna make a more in depth review in a few days I think.
I'm looking at purchasing the 3.75 inch Peecock 3S next Friday. Does it come with an erection rod as part of the price, or do I need to purchase it seperately? Because when I look at purchasing it, there's an option to order the "pleasure rod" but after looking that up, it's the erection rod but with a non-detachable pleasure kit (and I was just wanting the erection rod)
yes, the price comes with the erection rod. but it doesn't come with the pleasure kit (the soft silicone that can be attached to the base of the erection rod).
I've done a review of this prosthesis on my blog with several photos. Very complete.
http://protesisftm.tumblr.com/
A greeting
Quote from: henry81 on September 20, 2015, 05:51:01 AM
I've done a review of this prosthesis on my blog with several photos. Very complete.
http://protesisftm.tumblr.com/
A greeting
Hi Henry,
Thanks for the great review!
I recently got my Gen3S peecock and also find the hole a bit small...
How did you open the hole to make it bigger?
(sorry, maybe I should PM you, but I haven't got enough posts for that yet..
I really wanted to use my Gen3S, but just couldn't because of the small hole :-\)
I would really appreciate your help!
Thanks for sharing the review, looking forward to ordering mine!
Actually it is a little difficult to make the largest peecock hole. To make the biggest hole I used a small pair of scissors of the straight lines, not the kind that are curves, a small pair of tweezers those tweezers and a cutter, the thinnest knife you have.
The important thing is that the hole is the more rectangular as possible and that the pieces more large removed from inside.
Attempts to enlarge the hole by with the cutter and leave it straight. And with scissors agrandas hole inside giving small cuts and sacandolos with tweezers. There are times that you hit the Court but the piece you see that it is cut in half. There you can complete remove it with tweezers or pull out it with tweezers, remove it out and finish give the cut out...
It is a matter of patience and go slowly. It is better to cut some and try putting under the tap to see if it flows better until you see that the flow rate that can endure without collapsing the STP Cup is wide enough.
Certainly so difficult test to see how and if you see that you don't have a pulse, you can also try to enlarge it as they do to those who make a hole to the mr.limpy, heating a screwdriver and pushing through the hole.
I hope that all of this has helped.
A greeting!
That helped a lot!
Thanks! :)
Quote from: henry81 on September 21, 2015, 08:01:23 PM
Actually it is a little difficult to make the largest peecock hole. To make the biggest hole I used a small pair of scissors of the straight lines, not the kind that are curves, a small pair of tweezers those tweezers and a cutter, the thinnest knife you have.
The important thing is that the hole is the more rectangular as possible and that the pieces more large removed from inside.
Attempts to enlarge the hole by with the cutter and leave it straight. And with scissors agrandas hole inside giving small cuts and sacandolos with tweezers. There are times that you hit the Court but the piece you see that it is cut in half. There you can complete remove it with tweezers or pull out it with tweezers, remove it out and finish give the cut out...
It is a matter of patience and go slowly. It is better to cut some and try putting under the tap to see if it flows better until you see that the flow rate that can endure without collapsing the STP Cup is wide enough.
Certainly so difficult test to see how and if you see that you don't have a pulse, you can also try to enlarge it as they do to those who make a hole to the mr.limpy, heating a screwdriver and pushing through the hole.
I hope that all of this has helped.
A greeting!
The new peecock looks great! I would love to buy one, but I've already spend 270 euro's on their previous one which already tore when I took out the erection rod :/
Posting my review soon, but be careful. Peecock is STILL having issues with their material ripping at the base of shaft.
Quote from: maxman on October 01, 2015, 09:56:35 PM
Posting my review soon, but be careful. Peecock is STILL having issues with their material ripping at the base of shaft.
This happened to mine and I keep meaning to email because it's a deep slice, worried it's gonna break through to the hole.
Quote from: CursedFireDean on October 02, 2015, 01:50:06 PM
This happened to mine and I keep meaning to email because it's a deep slice, worried it's gonna break through to the hole.
They were very quick go respond during my entire setup of receiving my tester, then suddenly when it broke, they basically said it's my fault for wearing the harness wrong then stopped responding. It ripped right through and I asked them to pay return shipping (as it was a tester product and they wanted it back to analyze the rip) and they stopped replying to my emails!
Sent from my SM-G900W8 using Tapatalk
Quote from: maxman on October 02, 2015, 01:57:27 PM
They were very quick go respond during my entire setup of receiving my tester, then suddenly when it broke, they basically said it's my fault for wearing the harness wrong then stopped responding. It ripped right through and I asked them to pay return shipping (as it was a tester product and they wanted it back to analyze the rip) and they stopped replying to my emails!
Sent from my SM-G900W8 using Tapatalk
Very disappointing. Especially since the rip was because of their harness, which they advertise as compatible. Not really. I'll email them and hopefully I will get a better response.
I reviewed this on my blog (link in signature) and while the product was decent, it ripped very quickly and the company proved their service is disappointing for the second time with me.