STP frustration

[xAndrewx]

I really hope you can post a picture soon.  I'm totally excited to know more about this. 

Agreed, if it's cheap to make you might even be able to sell them and make some profit for your top surgery

[ty.to.the.man]

andrew: thats actually a very good idea for him!

[chakka]

Radar, you shouldn't give on STP's all together.  I know there are companies out there that make a totally latex free STP. 

[Dakota27]

JQUAL ... I've got to see this too! That would be fantastic! I think you may have a good money maker here. Lol. Because I know I would absolutely be interested in doing bussiness with you.

[MaxAloysius]

I'm completely dying for those pictures!

-dies quietly in the corner-

[mistergutsy]

Alright, sorry to leave all you guys hanging but the STP that I made out of a flexible material started to fall apart after about two weeks. I was so frustrated and upset about it at the time that I kind of gave up for a while. I am still at least searching for another material I could use instead, but it's really hard to find something that is durable, flexible, AND waterproof.
Anyway, I thought I could at least show you guys what I'm using in the meantime... it's really nothing fancy, just the actual "shewee" that I used to model my custom stp after. The only difference with mine is it was shorter, didn't have the long scoop in the back and it wasn't made of this crazy hard material that the shewee is made from.






All I can say about this STP is that it works. I don't have leakage and I don't really have problems with it. I can still use a urinal no problem but it isn't as comfortable as I would like it to be. Don't get me wrong it kind of works with my anatomy so it's WAY more comfortable than getting poked with a medicine spoon believe it or not, but you can for sure still "feel" it down there which is what I was trying to illuminate with my custom STP.

So all that being said I'm still going to try and perfect my stp, it's just still going to take a while.
Thanks for the patience guys!

[jxpx]

JQual,
With the flexible material you were previously trying to use, was it a gogirl/similar to a gogirl? Right now, I'm trying to make a similar stp with a gogirl and a packer and the problem I'm having is that the gogirl slips out of the back of the packer and doesn't stay put.  It could be because the gogirl is very flexible and it sounds like the shewee is hard plastic.  Either way, I'm curious if you used any certain method to get the sheewee to stay put.

[mistergutsy]

JQual,
With the flexible material you were previously trying to use, was it a gogirl/similar to a gogirl?

It wasn't like the go girl... it was a little tougher than that. It was soft and flexible to the touch but it stayed in place easily. I have a million problems with the gogirl design and the main one is that it would collapse on me when I would try to use it. That and the funnel system was to low down and pointed down, which didn't make sense to me. When I put a packer on it and tried to "aim" it would cause a kink in the tube, overflow, then leak out the back.
But maybe that's just me, I've come to find that everyone likes something different.

Right now, I'm trying to make a similar stp with a gogirl and a packer and the problem I'm having is that the gogirl slips out of the back of the packer and doesn't stay put. Either way, I'm curious if you used any certain method to get the sheewee to stay put.

Which packer are you using? The GV sailor? I've had a lot of problems about "slipping" with that packer not sure why maybe its the material but the mr. limpy tends to grab the material more. I've tried a hundred different kinds of glues and nothing works with that cyber skin stuff, even the toughest glue will just flake off. Anyway, my only suggestion is to make sure the hole that goes into the packer is much smaller then the tube you put in it. For example when I make a hole through a packer I do it with a piece of heated metal that's no bigger then the size of #2 pencil lead, after that the a quarter to a half inch tube should fit really snug.

It could be because the gogirl is very flexible and it sounds like the shewee is hard plastic.

Alright so here is the original shewee

and here is mine without the packer

as you can see I cut off most of the tube to the shewee and glued my own tube on, for two reasons. One, the packer will not hold onto the shewee tube, it will just slide around. Two, because its hard stiff plastic and will totally make you look "hard" all day, and there is no way to adjust and pack it to make it not look that way. 

Anyway, I hope some of this info helped. Let me know if you have anymore questions I'm happy to try and help you out.

[ty.to.the.man]

does the glue u used stay? if so what type of glue? i think i might try to make the same thing.

[mistergutsy]

it's just gorilla glue... and yes it totally stays, doesn't leak or anything.

[ty.to.the.man]

ok awesome. also just wondering i looked into the SheWeeGo have u looked at/have it? Im not sure how similar it is.

[ty.to.the.man]

i just got an idea. do you guys think it would work if you made a freshette but with the material they use for the Whiz STP? it would make it wayyy more comfortable to have in your pants all day. just an idea.