Found here: http://www.emisil.com/ (http://www.emisil.com/)
Apparently it's this new place, you guys might have gotten an email with their link, but they look really promising.
I dunno, kinda thinking about ordering one of their already mades and giving a review.
What do you guys think?
Oh man...these look AMAZING.
Don't they? They're extremely realistic, and for the price? Hopefully worth it.
WOAH! Colour me very impressed! I hope someone buys one of these and can let us know how they stack up! :)
I think it looks super realistic as well. Has anyone used one of these? Really considering ordering one.
The prosthetic itself looks pretty good, the hair is another matter.
This is absolutely phenomenal! I just wish somebody would make something this good that has an STP. I'm one of those pesky, picky people that isn't interested in the sexual aspect and would rather have something to pee through. Is there any mention on the site of plans to incorporate an STP?
Still, I'll be keeping my eye on this. It looks jolly lovely :)
Wow so i'm impressed. Though the hair does look like they attached part of a tribble to it. Huh might consider this since the tyron was so damn unimpressive....
Quote from: Lord of the Dance on February 14, 2013, 01:26:30 PM
This is absolutely phenomenal! I just wish somebody would make something this good that has an STP. I'm one of those pesky, picky people that isn't interested in the sexual aspect and would rather have something to pee through. Is there any mention on the site of plans to incorporate an STP?
Still, I'll be keeping my eye on this. It looks jolly lovely :)
I'm the same way. Might be worth emailing them to ask them if they can put a hole through the shaft to make it "STP friendly" then you could just make your own plumbing or buy some from online stores (I think almost every STP site out there will sell just the plumbing). I'll email them a bit later today maybe to see if they are willing to do that. Good find Seb.
where are these made?
Hmmm...they look a bit "diseased"...very blotchy or something. Hair is kind of strange too, really fluffy. I guess they have potential, but I think I'll stick with products that have already been established for now.
Pretty realistic. Actual penises do have variation in skin coloring. These might be a little overdone in that department but at least they're trying. First non-circumcised version I've seen that looks pretty legit too. The hair reminds me of those troll dolls though . . .
And what they really need to do is come up with a dual one. That seems to be the holy grail that no one's really perfected imo – a super realistic pack and play. I figure, if someone's been able to make even half way decent foreskin on a prosthetic, why can't they come up with one that actually changes size from say, 3in to 5in? It could still have a rod insertion, but I just think most of the pack and plays on the market are too big to pack with realistically. And if you're in a situation where you actually want to use the thing it's bad enough having to put rod in the thing but having to switch equipment in the heat of the moment is even worse.
It's a shame that the non-circumcised one has to be one the most expensive flaccid ones they have though and that hair is $85 extra, that much, really?
I also agree on inside's troll hair comment, I know exactly what you mean. Have you looked at sinthetics? I showed their non-circumcised one to someone with a non-circumcised penis and they had to look twice to notice it wasn't real even though I'd told them it was a prosthetic (and I'm not in the habit of sending people photos of dismembered penises.)
It actually does have a flex rod if you click on the erection one or something like that. The flex rod works similar to the ReelMagik flex rod. It also says that it can be used for sex and so on.
IMO the flaccid ones look the most realistic. I mean, they're missing full 3D testicles, I think, but I'm willing to compromise since they are moveable inside the sack...
The erect ones aren't as nice as RM's (yet)...I think they still need to work on their coloring. But shape-wise, I think they're on par if not better than the competition. Finally, a cock that bends realistically upward, hugging the body...apparently even with the flex rod, RM's won't do that.
Quote from: insideontheoutside on February 14, 2013, 04:32:38 PM
And what they really need to do is come up with a dual one. That seems to be the holy grail that no one's really perfected imo – a super realistic pack and play. I figure, if someone's been able to make even half way decent foreskin on a prosthetic, why can't they come up with one that actually changes size from say, 3in to 5in? It could still have a rod insertion, but I just think most of the pack and plays on the market are too big to pack with realistically. And if you're in a situation where you actually want to use the thing it's bad enough having to put rod in the thing but having to switch equipment in the heat of the moment is even worse.
I hear yah. The only one who seemed to figure it out was Tyron but the only reviews you could find were from the UK and few and far in between. I think the main challenge with this is a) finding a silicon that has the ability to go from one size to another without tearing/breaking and b) making a pump system that's not freakishly expensive. Still one can dream of the day they figure it out.
As far as the color on these goes, I'm going to chalk it up to rough photography personally... You can never tell how something will actually look in real life from a photo on a computer. Definitely going to keep my eye on this one and the Sinthetics, hopefully someone buys from these guys and does a review!
The flacid ones with 3D testicles look amazing. Still I agree with the diseased look on some of the prosthetics, while others look ok. The hair is pretty weird, but thank fully doesn't have to come with. Personally I will not use anything with a flex rod. I've heard of people getting to into things with them only to have the rod poke out which can seriously injure someone. I also really can't justify $300 on what is essentially a packer, I'm on a tight budget and as it stands most of my money is going for bills, gas, food, things like clothes and care products, rent.
I don't know where you guys are getting the "diseased" off-coloring from. Penises aren't perfect, and I think most of them look mottled like that as opposed to the perfect porn star look. I think it's a very natural look. It looks as if there is actually blood engorged down there, as opposed to just a flaccid penis that is apparently big. Most cis guys dicks I've seen look like that, to be honest.
The hair looks silly right now, but with a trim I'm sure it'd look fine (you have to trim RMs as well, I hope you guys realize!).
I am pretty set on getting one of these bad boys, and I'll put up a review. Waiting on my Reelmagik as well as my Sinthetics, both coming in the next few weeks, so maybe I'll do one big review for all these prostheses for you guys.
OK, so...I think I've decided to order one of these just to compare it to the other prosthetics I have (RM, LJ). The LJ is awful, and I never use it, but the RM is my favorite, and I'm actually very curious as to how these compare. I'll do a review as well once I receive it. It says the ones in stock ship immediately, so we'll see what happens. I'm hesitant after hearing what happened with the Ultimate Prosthetic, but these look a bit better than those did. Also curious about the "flex rod"...it seems as though this company is touting all the features that RM already has...wonder where they got the ideas from?:) Anyhow, I'll post a review once I get it.
Man if i had money I would totally buy one of these...
These look pretty nice for the cost. I really like totally 3d balls, kind of got used them from the RM basic packer, and not sure I would want to go back. It looks like one or two of the models may have this. The color variation is weird, but it is true that skin isn't a flat color, maybe went overboard. Also thought the hair is strange, but then a hair cut might work...
Not sure why the difference in cost, except that some appear to have the 3d balls, but they go from $235-350 for the flaccid without any reason why that's so. Doesn't seem to be working for STP or pack and play.
Anyway one or two of the models look good. Will be interested to see what others have to say.
On a side note, loved the page where he shows the process. This is awesome.
--Jay
sent them an email asking for a vid showing testicle and skin movement. will let ya know about their reply. I think the flaccid 2 looks alot like the 4.5 RM, and i like the uncircumcised number 5, but I am not sure about the balls on that one. they almost look prepubescent...
Quote from: AlexanderC on February 14, 2013, 04:45:45 PM
It's a shame that the non-circumcised one has to be one the most expensive flaccid ones they have though and that hair is $85 extra, that much, really?
I also agree on inside's troll hair comment, I know exactly what you mean. Have you looked at sinthetics? I showed their non-circumcised one to someone with a non-circumcised penis and they had to look twice to notice it wasn't real even though I'd told them it was a prosthetic (and I'm not in the habit of sending people photos of dismembered penises.)
You seem to be one of the only other guys I see mention wanting an uncut one and I known I saw another one recently in my search where the foreskin actually moved up and down which I thought was pretty great but now I can't remember where the heck I saw it. If I figure it out I'll post about it.
My two cents on why the uncut is more expensive, it's harder to cast and there's more material. That's my guess anyways on why the price difference. I love the look though. I'll be emailing them tomorrow to ask about whether they can put a hold through the center of the flaccid ones upon request to make them STP friendly. I'll keep you guys posted on what I hear back in that regard.
Update, guys. The team said they are putting up a new video on Monday and that they will email me when they get it uploaded. :)
Quote from: insideontheoutside on February 15, 2013, 12:32:49 AM
You seem to be one of the only other guys I see mention wanting an uncut one and I known I saw another one recently in my search where the foreskin actually moved up and down which I thought was pretty great but now I can't remember where the heck I saw it. If I figure it out I'll post about it.
Add me to that list, for ages I've searched for an uncut packer. I've seen a couple but they always seem to leave part (or all of) the head exposed. In an ideal/perfect world I'd love one with fully retractable foreskin rather than stuck in one position. Maybe I'm just too picky!
Wow, what a quick reply from them! I'll definitely be watching this company with anticipation; here's hoping they don't fold under the onslaught of incoming orders! :P
So nice to hear he appears to have a professional operation. (I am guessing there is one person, btw. Or he and a business partner.)
--Jay
Has anyone noticed that there is no telephone number or business address? That makes me a little leery...anyone have any idea where they are located?
They're in Europe for sure, not exactly sure where.
I got an email and it included an email address I think. I was a bit wary of it, because it was indecipherible, and then I saw this here. I think it is Italy? I saw an IT or something like that on it.
I'll see if I can locate it. There IS an phone no.
--Jay
I've been communicating with them as well and so far they have been really courteous and seem to be very accommodating. They don't just make penis prosthetics and are a much larger business.
I would love to have a prosthesis with uncut/moveable forskin. That only exists in our dreams though.
Really after the last upset with TUP, I'm hesitant but will most likely purchase from them within the next month or so.
It's too bad that we don't have the funds to have a reviewer or something. We could get samples of products and review them (and if they don't arrive like TUP...). I was fine with trusting RM for the basic packer no one had seen. There is a hx with RM that shows them to be trustworthy. We didn't have that with TUP and don't with Emisil.
There's another guy someone found awhile ago too. Can't recall. There is a guy here who may get his business together. Saw his work and it is very nice. Working on stuff like STP and a pack and play so basically a 3 and 1.
--Jay
Quote from: Codyboy1989 on February 15, 2013, 02:19:44 PM
Has anyone noticed that there is no telephone number or business address? That makes me a little leery...anyone have any idea where they are located?
They are in Russia.
The vids are up. They look good! Also, the YouTube profile lists them as in Lithuania.
http://www.youtube.com/channel/UCokLo1-Ymd-pSDSzvPxoL2A?feature=watch (http://www.youtube.com/channel/UCokLo1-Ymd-pSDSzvPxoL2A?feature=watch)
Awesome! That head does look a little angry to me, but everything else is just amazing! I'm sure it would be easy to request your prosthetic be coloured with the head a closer colour to the shaft, so that doesn't overly bother me. It has a thick tab though, and I wonder how visible that would be without the hair.
All in all they look awesome, and I will seriously be considering buying one in the future!
They look really good! Might be a less expensive alternative to RM.
Their google+ says they're in Germany. Kinda suspect.
Depending how big the company is, they might have a manufacturing plant in one country and then do all the HQ stuff in Germany (or Italy). Maybe the guy who orded one in the other thread will tell us if it says anything on his receipt once he gets the package.
The link in the other thread says someone else has ordered one and it came from Germany. The review was pretty damning, so it looks like our only trusted options are reelmagik and peecock again.
As an atheist UK guy this is really annoying, give me my foreskin dammit!
Yeah I just read that review too, def won't buy from them.
The problem with the "reviews" is that they aren't actual "reviews".
I want a solid one. Not just griping. I want to know everything about it positive and negative WITH PHOTOS of everything. Well rounded reviews are so important and yet no one seems to want to put in the effort and do them. It's really frustrating me.
Yeah them not being responsive is a red flag. We'll most likely never hear if their situations were resolved or not and how that experience went.
Just my own update: I emailed them early this week and still haven't gotten a response from them :-\
Quote from: Yossarian on February 22, 2013, 09:50:17 PM
The problem with the "reviews" is that they aren't actual "reviews".
I want a solid one. Not just griping. I want to know everything about it positive and negative WITH PHOTOS of everything. Well rounded reviews are so important and yet no one seems to want to put in the effort and do them. It's really frustrating me.
Yeah them not being responsive is a red flag. We'll most likely never hear if their situations were resolved or not and how that experience went.
I agree.
I recall though that when I first ordered the RM basic packer there were literally zero reviews. I did the very first one I could find anywhere, including tumblr. So I understand with new product. OTOH, looks like that one guy could have done one, but it wasn't really his website. As I recall it was a response to a post. I agree it's frustrating though. I trusted RM due to prior experience of other guys-- yes they ship and so on.
--Jay
Did you guys see their Youtube videos?
http://www.youtube.com/channel/UCokLo1-Ymd-pSDSzvPxoL2A (http://www.youtube.com/channel/UCokLo1-Ymd-pSDSzvPxoL2A)
Meh..why in the world would they of actually produced a non-3D scrotum? The flaccid uncut models look amazing but they had to go and give the scrotum a flat back. Sorry, but that kills the experience. Sale lost. Upgrade all prosthetics to 3D scrotum and ill give you my business.
The erect prosthetics look diseased.
Other than those 2 things, well done.
ok I'll just chime in because I still have my junk. Their hyper realism is a bit disturbing. There is a reason the word hyper is in there. My penis is not that mottled (barely at all actually), and the hair looks horrid and like you tried to straighten it and then spray adhesive it or something. I mean, I'm not familiar with these products in general, but as a bisexual seeing this coming at me would just scare the ->-bleeped-<- out of me with that troll hair.
Quote from: AlexanderC on February 20, 2013, 01:57:03 PM
The link in the other thread says someone else has ordered one and it came from Germany. The review was pretty damning, so it looks like our only trusted options are reelmagik and peecock again.
As an atheist UK guy this is really annoying, give me my foreskin dammit!
Do you recall what the review said? They disabled comments so nobody could read it...
That always concerns me. Transparency is key. The correct thing to do is respond publicly to bad reviews, not hide them...
Quote from: justcause on February 24, 2013, 04:41:50 PM
Do you recall what the review said? They disabled comments so nobody could read it...
That always concerns me. Transparency is key. The correct thing to do is respond publicly to bad reviews, not hide them...
It was on the FTM Packers thread not in on the YT video, but those comments that mentioned Emisil have been deleted. I agree, my opinion of these companies are easily becoming spoiled. I'm very interested in knowing what happened to the two lads.
I believe the first guys ordered a 02 erect and the rod broke within 15 minutes of him owning it. I'm not sure how it happened. There may have been a color issue. I can't recall. He was trying to get in touch with them and they were slow going on responding.
The second guy ordered the 02 flaccid with hair and the hair was easily pulled out. All he did was run his fingers through it. He was also trying to get in contact with them and received the same non response.
I'm about at my wits end here and I'm ready to give up on my search.
It appears the comments weren't true, which is why they were removed.
(https://www.susans.org/proxy.php?request=http%3A%2F%2Fi6.photobucket.com%2Falbums%2Fy202%2FSilverBrair%2Fyo.png&hash=fe67fb60494dad21077a0d188abb2f1e24e10617)
Wow, so sketchy. Let's give these guys a break, then.
Yea, whenever there is a niche market, there is always a more prevalence of this sort of thing going on.
Emisil is a more established company, not just some teenager in a basement. Their products look good, I am just shocked that they actually produced a non 3d scrotum version.. Too old school.
So Emisil came through on their promise to me. They made the darker prosthetic and have sent me the photos of it as they said they would. They said they would post them on their site so you'll be able to view them there once they are. If they don't post them. I'll shoot them a reminder and I'll put them up here. I don't see us having a problem though.
I'm going to purchase it and do a review once it comes.
I've emailed with emi sil twice so far.
Received a response within a few hours both times.
I e-mailed them inquiring as to whether they had plans to produce the s03 prosthetic with a 3d scrotum. They said no, but if interested they could produce one at a more expensive price. The price was about double. Still cheaper than RM and my only hesitation in purchasing is that they do not do that whole custom color ordeal like RM does. If I am going to pay near $500 for a prosthetic i'd like it to match me perfectly and be long-lasting and durable.
Just saying.
I'm very interested in knowing why the cost doubled. They aren't the only company I noticed this happens with.
If you go to RM and look at their basic packer and then at the basic prosthetic the only two differences are the flex rod and the tab. Why do those two things make the prosthetic $400 more?
Either those flex rods are expensive as hell or they're really milking the "labor" costs.
Quote from: Yossarian on February 26, 2013, 07:00:40 PM
I'm very interested in knowing why the cost doubled. They aren't the only company I noticed this happens with.
If you go to RM and look at their basic packer and then at the basic prosthetic the only two differences are the flex rod and the tab. Why do those two things make the prosthetic $400 more?
Either those flex rods are expensive as hell or they're really milking the "labor" costs.
There is a much more than just the tab and the flex rod. There's more realistic coloring and the build of the prosthetic is very different. There are far more layers of silicone making it have a much more realistic feel. I'm sure theres more but thats all i can think of off the top of my head.
I don't know how I missed all that. The RM costs makes more sense, but the Emisil one does not.
So i'm the only one who understands why the price doubled....? You asked them if they could pretty much mak you a custom packer. To add the 3D balls they probably have to re-sculpt, re-mold and re-cast the entire thing, of course it's going to cost more. It's not as easy as just 'adding on' the 3d scrotum, everything there is cast in a mold. If the mold doesn't exist, then they have to make one and that could cost about 100+ in materials, and hours of extra work.
Not to be rude, it's not my intent, but I think everyone's being a bit too snappy. They are a new company, give them a chance? We don't even have a review yet and everyone's already judging the crap out of them.
Just my two cents...
Same here, Bastian. It actually makes me a little mad they've gotten such a bad rep. They shouldn't have any rep at all, since no one's received a product. I don't know why people are so quick to judge a company that might offer a lot of relief for people who can't afford more expensive ones.
I'm not judging them. I actually like them and am buying from them. I was simply curious as I don't know what really goes into making these prosthetics, which is pretty obvious by my questions.
As prosthetics are an important part for some of us, I think we're allowed the nitpick and talk about every single last detail, positive or negative. That way when we go to order we can bring up our concerns with those who provide us with these things. If people are going to shell out five hundred to a grand they want to be damn sure it's worth it in the end.
You make a good point Yossarian!
Sorry I guess it was the 'labour' cost comment that got to me. As an artist it's infuriating when people are like 'why does this cost so much?' and I have to explain to them that it takes 6 hours to make and by paying me my asking price you're paying me only $9-$10 bucks an hour.
Sorry 'bout that. Essentially yeah, if someone's asked for a custom packer and Emisil said "ok" that just makes me love them so much more because they are willing to go through all the trouble of re-sculpting, re-molding and re-casting their product. Such it's going to cost more, they pretty much have to re-design the entire piece but the thing is they are willing to do it. That's a point for them from me.
I personally have only ever considered spending more than a grand on one prosthetic and that was the Tyron Phase 2. Now that that ship has sunk thanks to the 'grand reveal' of the Tyron 3 i'd prefer to put closer to half that money towards a flaccid and erect since we can't have both in one. I personally can't stand the RM so it's off the table for me. I really hope Emisil and Sinthetic check out and produce good products.
Also want to point out that the custom packer isn't justcause's only option, the other two erect penis' have 3d testicles already so if you are hesitant about the price of the custom you could always go with the cheaper one that already has testes and then decide if you like them enough to tack on more money.
Ah, I understand where you're coming from. I didn't take all that into consideration.
Correct me if I'm wrong but the thing about Justcause is he wanted the flaccid 03 since it's uncut. They don't offer uncut erects.
I would be more willing to purchase an erect if they had one that was. I agree with him that prosthetics shouldn't come flat back. I guess to me it just doesn't make much sense. I think they'd have a real chance if they were to provide them since no one else really does.
Quote from: Yossarian on February 26, 2013, 07:00:40 PM
I'm very interested in knowing why the cost doubled. They aren't the only company I noticed this happens with.
If you go to RM and look at their basic packer and then at the basic prosthetic the only two differences are the flex rod and the tab. Why do those two things make the prosthetic $400 more?
Either those flex rods are expensive as hell or they're really milking the "labor" costs.
I may not have been clear in what I said. (I also did not read the comments between yours and mine, so someone may've already cleared this up!)
I inquired about the s03 prosthetic. This model is one of their flaccid uncut models that has a flat back on the scrotum. The 'flat-back' scrotums seem sort of archaic to me so I asked if they had plans to upgrade this model to a 3d scrotum (as opposed to flat-back). They said "no" but that if I wanted that done they could do it for a fee. (Which is great that they are even willing to do this)
I am not sure the exact process but I know it has something to do with making a new mold. So the price increase makes sense. It is also them going out of their way to do it.
I do wonder if there is a more Frankenstein method of just melting a prosthetic knob and bullocks together. But alas, I know nothing of this industry.
The cost doesn't bother me. My hold up is no custom colour options.
Quote from: Bastian on February 26, 2013, 10:58:12 PM
Also want to point out that the custom packer isn't justcause's only option, the other two erect penis' have 3d testicles already so if you are hesitant about the price of the custom you could always go with the cheaper one that already has testes and then decide if you like them enough to tack on more money.
Ok, I never said I had a concern about the price. :P
The only reason I posted was to let people know they are active in responding to questions cause everyone seems to be throwing stones at them when they've done absolutely none wrong.
Also, I don't want an "erect" dick. the s03 prosthetic I inquired about is a flaccid uncut model with a flat-backed scrotum. I wanted to know if they had plans to offer a 3d version of it.
For future reference guys the S numbers refer to colors, H numbers for hair, the numbers by themselves indicate which of the series in FL or ER, you're looking for.
So if you ordered a FL02 S14 H01. You'd be asking for a Flaccid 02 with Brown(S14) skin and black (H01) hair.
I don't think we're necessarily throwing stones. It's just with TUP scamming people and those customer reviews that turned out to be fake, everyone is on edge.
I wish they weren't in a different time zone. I have to wait until about 2 AM before I receive their emails.
So I asked Emisil for their address and they replied.
"Penis prosthetics are made in Lithuania. Lithuania is European Union Member."
ADDRESS:
Guobu 49
LT-52316 Kaunas
Lithuania
Other address where we are located is in Germany.
Neuendickstrasse 15b
47475 Kamp-Lintfort
Germany
They were even kind enough to throw in a map lol.
(https://www.susans.org/proxy.php?request=http%3A%2F%2Fi6.photobucket.com%2Falbums%2Fy202%2FSilverBrair%2FGermany-Lithuania.jpg&hash=bbdda3d18d8feb0755eee760074013011eaa5664)
Quote from: RagingShadow on February 15, 2013, 12:13:06 AM
sent them an email asking for a vid showing testicle and skin movement. will let ya know about their reply. I think the flaccid 2 looks alot like the 4.5 RM, and i like the uncircumcised number 5, but I am not sure about the balls on that one. they almost look prepubescent...
the balls do look pre pubescent
Quote from: justcause on February 26, 2013, 11:58:59 PM
Ok, I never said I had a concern about the price. :P
The only reason I posted was to let people know they are active in responding to questions cause everyone seems to be throwing stones at them when they've done absolutely none wrong.
Also, I don't want an "erect" dick. the s03 prosthetic I inquired about is a flaccid uncut model with a flat-backed scrotum. I wanted to know if they had plans to offer a 3d version of it.
Fair enough, I misinterpreted your post, my apologies. I thought you were talking about the erect s03 prosthetic. I agree that the flaccid uncut one would be great with 3D balls, as while less ftm's will be interested in that model in general, there are people, such as yourself that would very much like to purchase it since it's not really offered anywhere else.
Sorry for the misunderstanding.
So far I'm getting the message that this company is legitimate, responds quickly and politely to emails, and has a speedy production time (evidenced by the prosthetic someone asked to be made), and is open to feedback and change. I'd say that all up things are looking great for Emisil! :3
I agree. I really like this company. A lack of funds is the only reason why I haven't already ordered from them. That, and I'm waiting on my Sinthetics.
I placed my order officially yesterday morning. Now I get to play the waiting game.
Quote from: Bastian on February 27, 2013, 12:12:01 PM
Fair enough, I misinterpreted your post, my apologies. I thought you were talking about the erect s03 prosthetic. I agree that the flaccid uncut one would be great with 3D balls, as while less ftm's will be interested in that model in general, there are people, such as yourself that would very much like to purchase it since it's not really offered anywhere else.
Sorry for the misunderstanding.
I've only just properly read through this after coming back off holiday, but the number 05's balls look pretty 3D to me. Hard to see with it sitting down though.
I'm thinking the FL05 (http://http://www.emisil.com/Prosthetic-store/Flaccid-prosthesis/Flaccid-prosthesis-ss5.html) only appears that way because it rounds into a flat and isn't just "clean cut" like the others.
Hi guys,
I ordered from Emisil an erect penis prosthetic. They said they would send it on friday and they did.
I am waiting for it.
And yes, they are in Lithuania :)
Yeah, they shipped mine out this morning as well. Just as they told me they would. Seems like Emisil is batting a thousand.
It'll take about a week to a fortnight to get here so we'll see.
So it came today. There were no issues and I'm really excited to try it out. I'll come back with my reviews in a few days. I want to give it a full run before I form a complete opinion on it.
Quote from: Yossarian on March 19, 2013, 03:20:50 PM
So it came today. There were no issues and I'm really excited to try it out. I'll come back with my reviews in a few days. I want to give it a full run before I form a complete opinion on it.
awesome! can't wait for this! if you are willing to, post pictures and everything with your review.
Will do.
Go here for the text review (http://fightingweakness.tumblr.com/post/46111073957/emisil-prosthetic-fl02s14-reveiw)
Vide review (http://www.youtube.com/watch?feature=player_detailpage&v=ivCaG6xIQsA#)
Yossarian, loved your review. "Hello lads" Nice baritone man!
"Do you feel dirty". LOL! Btw, the color is pretty good. Looks like a nice product.
Do you know what the model no. is on this?
--Jay
Ha, thanks!
It's the FL02 in s14.
i agree with jay you have a great voice yossarian.
Third'ed, your voice made me jealous lol. Good review too, thank you for taking the time to make it!
You lads are too kind.
It was no trouble at all.
Great review Yossarian!
Im a few skin shades lighter than you and was wondering what skin tone you purchased? (Did the head come pink or you requested it?)
I'm thinking about ordering one soon and just want an idea as to the coloring i'd get. Thanks XD
S14 color.
That's just the way they painted it but you can request a specific coloring.
Has anyone else ordered/gotten their product yet?
Ahaha, I couldn't help but snicker at that last part of the review!
It looks very soft. I think that if I owned one of those, I wouldn't be able to resist groping it every so often XD
While the review was nice, I was wondering a bit about some of the other models. For example, has anyone tried the FL05? It looks...interesting, needless to say. I'd like to buy one, but then again, I don't necessarily own enough money at the time to be buying one without knowing what I'm getting myself into!
SO I totally splurged and spent more money than I have to order one of these last night! I'm super excited, and just hope that it won't be a let down! Yossarian, can I ask how long it took for you to receive your prosthetic after ordering? Needless to say I'm impatient as hell, and having a timeline to look forward to would help a lot. :{P
Naturally, I'll post a review when I eventually receive it. :D
I paid for it on Febrary 28th. It shipped March 8th and I received it March 19th.
They'll let you know when they ship it. Since mine was made before I purchased it I didn't have to wait.
Ooooooooooh, I didn't realise you didn't have to wait for yours to be made; I got really excited for a second there! :{P Still, I can be patient!
-tries super hard to be patient-
Can someone help please it seems as if I'm searching for the impossible.
Lol Do they use troll hair on those things??? Other than that, they look great! Crazy realistic. If they weren't so expensive I'd buy one right now.
Yea the hair does remind me of a troll doll other than that they look great except a little bit
Of the color. I just wonder if the ER04 model has much bend to it in case you wanna pack it every once in a while, but without a noticeable hard on lol
has anyone on here purchased the prosthetic with the flex rod in it? I can't find a review of it anywhere and I just wanted to know if it was worth saving the money compared to a reelmagik or to just get the reelmagik.
Quote from: kenton_07 on June 09, 2013, 10:16:44 AM
has anyone on here purchased the prosthetic with the flex rod in it? I can't find a review of it anywhere and I just wanted to know if it was worth saving the money compared to a reelmagik or to just get the reelmagik.
I know what u mean that's my problem i can't find any reviews regarding the flex rod. I feel like I'm search for the impossible.
I bought one of these back in april, it supposedly shipped on thursday so i should be getting it in a couple of weeks. I got it at a slightly discounted price so that i could review it for my review blog. I REALLY hope that it is better than the lolajake i bought. I was very excited about that product and then i got it and was just..... :'(. I think if the model i got wasnt as wide, then i would have been much happier.
I've researched so many different companies and products but it's incredibly hard to know what your getting yourself into just by reading reviews and not physically testing the product. I don't want to save and end up getting a product I'm not satisfied with. I wish there was an easier way or maybe a product that specifically states what I am looking for.
There really is no way to know if a product will satisfy you until you purchase it yourself. That is what is bugging me with this situation. I'm going off to finish my college degree at a 4 year university and I really want something that I can use. It is just frustrating!
I know what u mean. I don't want one just to have I also want one I can put to use as well if the time time comes. I looked at the ER04 model but I don't know how much bend it had for packing.
In the youtube videos, they look pretty good in regards for just packing and it seems great when you use the flex rod. I just wish there was someone who has the product and can say things about it from a buyer's perspective.
Yeah I think my main concern with packing the flex rod
is I don't want it to look like a massive hard on in my pants haha.
I'm unsure if I posted this before, but I found this review on a french language FTM forum of the erect prosthetic #2:
http://www.ftm-transsexuel.com/forum/viewtopic.php?f=23&t=7427&st=0&sk=t&sd=a&sid=e2d8b4ce4cda0ac2ab8789789e82d51b&start=30 (http://www.ftm-transsexuel.com/forum/viewtopic.php?f=23&t=7427&st=0&sk=t&sd=a&sid=e2d8b4ce4cda0ac2ab8789789e82d51b&start=30)
Google translate is quite...well...lacking. But it's close enough to tell that the person really likes their product. I wish I spoke French so that I could message them and ask more questions. Perhaps for a picture, if they're willing.
Someone on the thread asked them for a photograph this morning, so if they're willing there might be one there soon. The person who brought it said that they spoke to emisil on English, so if there's more you want to know they might be able to tell you more information without going through Google translate if you were able to message them somehow. If it comes to it I know a french trans person who might be able to help us out with translations, but Google translate doesn't go a bad job really.
All in all emisil is starting to look like a really honest company, much better than the farce we had with "the ultimate prosthetic", and turning out good products. If only I wasn't looking to buy a car in the near future...
Quote from: Nowhereboi on June 10, 2013, 10:40:19 PM
I'm unsure if I posted this before, but I found this review on a french language FTM forum of the erect prosthetic #2:
http://www.ftm-transsexuel.com/forum/viewtopic.php?f=23&t=7427&st=0&sk=t&sd=a&sid=e2d8b4ce4cda0ac2ab8789789e82d51b&start=30 (http://www.ftm-transsexuel.com/forum/viewtopic.php?f=23&t=7427&st=0&sk=t&sd=a&sid=e2d8b4ce4cda0ac2ab8789789e82d51b&start=30)
Google translate is quite...well...lacking. But it's close enough to tell that the person really likes their product. I wish I spoke French so that I could message them and ask more questions. Perhaps for a picture, if they're willing.
I'm willing to help with transations, as i speak french fluently...
(note, I'm just simplifying what they said, as I don't recognize some of the slang)
According to what they say, the prosthetic came in a really descreet and eco-friendly package, and it was tucked away in a little bag with the company name on it.
They really liked it, and they say that the prosthetic looks almost exactly like the way it's advertised, despite the color difference. They really liked the texutre because it felt a lot like skin when poked or pinched (ouch, i wouldn't like doing that to my penis. Just putting that out there)
They said the testicles moved when pressed on, a bit like real tesaticles. it appears they ordered one with the floating testicles, but I'm not too sure.
The prosthetic doesn't feel too uncomfortable when it's against the body, and it heats up fairly quickly, which is nice.
--
Wow.
The company is definitely trustworthy as it seems, unlike a certain prosthetic maker that has already been mentioned...
If the rumors of an STP addition are true, then I think I will be getting one of these in the future.
Holy crap you guys! I recieved confirmation of my package being sent and a tracking number today, fifteen days after I ordered a custom prosthetic! It should get to me within 7-19 days according to the email! :D
That was so fast, and the tracking number is real and coming from Kaunas for any of those wondering about where the company is located. I will let you all know what I think when it gets here, and will probably do a youtube review of it for everyone to see. :)
Quote from: Bane on June 14, 2013, 12:05:28 PM
Holy crap you guys! I recieved confirmation of my package being sent and a tracking number today, fifteen days after I ordered a custom prosthetic! It should get to me within 7-19 days according to the email! :D
That was so fast, and the tracking number is real and coming from Kaunas for any of those wondering about where the company is located. I will let you all know what I think when it gets here, and will probably do a youtube review of it for everyone to see. :)
Awesome! I look forward to your review!
Quote from: Bane on June 14, 2013, 12:05:28 PM
Holy crap you guys! I recieved confirmation of my package being sent and a tracking number today, fifteen days after I ordered a custom prosthetic! It should get to me within 7-19 days according to the email! :D
That was so fast, and the tracking number is real and coming from Kaunas for any of those wondering about where the company is located. I will let you all know what I think when it gets here, and will probably do a youtube review of it for everyone to see. :)
Which model did you purchase
I ordered ER02S03 without hair. :)
The only concern I have is that the skin tone might be a little too light, since I'm not confident about the colour that I ordered, but we'll see.
Hi there !!
I am the french guy who wrote on french forum abour prosthetic. May I help you ?
;)
Hey bg83! We would love an English review of your prosthetic if you can? We're all dying to hear more about them! :)
Quote from: Bane on June 15, 2013, 01:21:55 AM
I ordered ER02S03 without hair. :)
The only concern I have is that the skin tone might be a little too light, since I'm not confident about the colour that I ordered, but we'll see.
So that one has the flex rod?
Quote from: The unknown on June 15, 2013, 09:58:58 AMSo that one has the flex rod?
It does indeed Unknown! I'll let you know what I think of it when I give it a feel. ;{P
Quote from: Bane on June 15, 2013, 11:16:25 AM
It does indeed Unknown! I'll let you know what I think of it when I give it a feel. ;{P
You are AWESOME! Your def my go to guy now lol
I got the FL01 and i got it custom colored. I ordered it back in april and it shipped on 6/6/13. I just received it today. and OMFG. this is by far the most realistic looking and feeling thing i have ever witnessed. Everything about it is realistic. The size, shape, COLORING (AMAZING IN EVERYWAY!!!), and the feel is just omg. It feels just like flesh. I honestly dont hae a lot of words to describe just how awesome this is. I will be doing both a written and video review of the model which you will be able to find on my review blog and i will post it here as well. If any one has any questions, this would be the time to ask!
-Alex
Quote from: xaphroditesxapprenticex on June 15, 2013, 11:12:14 PM
I got the FL01 and i got it custom colored. I ordered it back in april and it shipped on 6/6/13. I just received it today. and OMFG. this is by far the most realistic looking and feeling thing i have ever witnessed. Everything about it is realistic. The size, shape, COLORING (AMAZING IN EVERYWAY!!!), and the feel is just omg. It feels just like flesh. I honestly dont hae a lot of words to describe just how awesome this is. I will be doing both a written and video review of the model which you will be able to find on my review blog and i will post it here as well. If any one has any questions, this would be the time to ask!
-Alex
Have you ever gotten to see or own a Reel Magik? I just got back from PTHC, and left being like "Reel Magik, for sure. Their products are PERFECT". But now, seeing your review, it sounds like Emisil is offering the exact same level of quality at a much lower price AND with a faster turn around time. I was wondering if perhaps you could make a comparison video at some point. Because I'm dying to see the pros and cons of both in respect to each other.
Just as a side note, I've been saving for a full year for a prosthetic, and was thinking of saving a little longer then seeing if I could manage a flaccid from Emisil and an erect from RM...or the other way around...so maybe one day I can make this kind of review on my own. God, they are all just so much money. Though I can see why, after seeing them up close.
Is the color spot-on? How did you choose the best color for you from their site?
Wow! Looks like reviews are slowly starting to build up for this company; they just keep looking better and better! :D I also thought that I would mention that my order was apparently order number 95, so it's worth noting that with close to 100 orders under their belt Emisil still seem to be producing their prosthetics on time. :)
Quote from: Nowhereboi on June 15, 2013, 11:48:17 PM
Have you ever gotten to see or own a Reel Magik? I just got back from PTHC, and left being like "Reel Magik, for sure. Their products are PERFECT". But now, seeing your review, it sounds like Emisil is offering the exact same level of quality at a much lower price AND with a faster turn around time. I was wondering if perhaps you could make a comparison video at some point. Because I'm dying to see the pros and cons of both in respect to each other.
Just as a side note, I've been saving for a full year for a prosthetic, and was thinking of saving a little longer then seeing if I could manage a flaccid from Emisil and an erect from RM...or the other way around...so maybe one day I can make this kind of review on my own. God, they are all just so much money. Though I can see why, after seeing them up close.
Is the color spot-on? How did you choose the best color for you from their site?
I do not own a real magik but i have seen some amazing photos and videos of their prosthetics and honestly, Emisil is better. Emisil has MUCH better coloring and is more detailed in general. The Reel magik has folds and a few veins here and there, but it still doesnt look like how an actual penis would. where as the emisil honestly looks like they took off someones penis and shipped it to you. It has EVERY little detail you could imagine, it even has "pores" (not like the material is porous, but like skin pores" The veins dont look painted on, they look as though theyre actually within the skin. The skin even moves like real skin would its just OMG AMAZING.
On the note of coloring, i did not pick a color from their website, i sent the owner a picture of my skin and he matched it to that, making it slightly redder (as genitals should be) and it is beautifully spot on. If i was born with a penis, this is the color it would be. I will be posting pictures on my review blog http://toysfortransmen.tumblr.com (http://toysfortransmen.tumblr.com) tomorrow if you are interested.
Another note- The tab on the packer is also MUCH different than anything i have ever seen. It has skin texturing on it so it doesnt stick out awkwardly. It is also very soft,not like it wont hold, but like how real skin feels!It is very "fleshy" feeling. The material moves and pulls the way real skin does.
Hi guys !
I am french and did a review on a french forum about my erect prosthetic ER02 by Emisil.
I really love it ! All details are perfect, from the skin texture, to veins details...
My only problem is the weight of erect prosthetic and the back of tab. The back of tab is shiny so that glue can't hold to the skin.
@ xaphrodite : what about the back of the tab ? Is it shiny too like some kind of plastic ? Can you glue the prosthetic to your skin ?
Do you have any pictures of it ?
I told about it to Emisil and said they will improve these problem
Thanks
Quote from: bg83 on June 16, 2013, 10:51:44 AM
Hi guys !
I am french and did a review on a french forum about my erect prosthetic ER02 by Emisil.
I really love it ! All details are perfect, from the skin texture, to veins details...
My only problem is the weight of erect prosthetic and the back of tab. The back of tab is shiny so that glue can't hold to the skin.
@ xaphrodite : what about the back of the tab ? Is it shiny too like some kind of plastic ? Can you glue the prosthetic to your skin ?
Do you have any pictures of it ?
I told about it to Emisil and said they will improve these problem
Thanks
Mine does not have a shiny tab. Theres no plastic or plastic like texture at all to the prosthetic anywhere. I dont own adhesive yet(its really expensive!) so im not sure how the gluing would work, but it does look like it is easily capable of it. This may be something that is different between the flaccid and erect models. The erect model is going to weigh more as it is firmer (firmer means it is denser which means it will be heavier)and has a flex rod in it. Maybe the plastic like-ness on the erect model is similar to the lola jake which does have plastic embeded in it to make it easier for the adhesive to stick.
Thanks for your answer xaphrodite :)
Ok, i believe that texture is différent from erect to flaccid. Emisil send me a picture of the back of tab (flaccid 02) and it is shiny too.
I thought that the back of tab was the same texture as the rest of the prosthetic.
Does the back of your tab is rough ? Do you have any picture to post ?
Thanks in advance ;D
Quote from: bg83 on June 16, 2013, 12:20:52 PM
Thanks for your answer xaphrodite :)
Ok, i believe that texture is différent from erect to flaccid. Emisil send me a picture of the back of tab (flaccid 02) and it is shiny too.
I thought that the back of tab was the same texture as the rest of the prosthetic.
Does the back of your tab is rough ? Do you have any picture to post ?
Thanks in advance ;D
The back of the tab is not rough, it has the same consistancy as the rest of the prosthetic. The back of the tab is just a smooth, texture-free version of the rest prosthetic. If light is put directly on the tab then yea, i guess it does look kinda shiny, but not like plastic, just because it is smooth silicone.
I dont have pictures at this moment but i will be taking some later today and posting both here and my review blog.
So i decided that pictures would not do this model any justice, so i took a magical video of it! Here is a video that shows the prosthetic up close. I have also added a picture of the prosthetic on so that you can see how the color match is and how it looks.
Video
http://www.youtube.com/embed/AncVP5muRWY (http://www.youtube.com/embed/AncVP5muRWY)
Picture
http://media.tumblr.com/4a71b7f342e91d0c641edc1b8cfd216f/tumblr_inline_moi2vxjgZR1qz4rgp.jpg (http://media.tumblr.com/4a71b7f342e91d0c641edc1b8cfd216f/tumblr_inline_moi2vxjgZR1qz4rgp.jpg)
The picture doesnt look as colorful for some reason but it looks to blend in VERY well, theres a part near the top of the tab where you cant really tell where my skin ends and the tab begins.
Im here to answer any and all questions about the emisil prosthetics
Quote from: xaphroditesxapprenticex on June 16, 2013, 02:19:35 PM
So i decided that pictures would not do this model any justice, so i took a magical video of it! Here is a video that shows the prosthetic up close. I have also added a picture of the prosthetic on so that you can see how the color match is and how it looks.
Video
http://www.youtube.com/embed/AncVP5muRWY (http://www.youtube.com/embed/AncVP5muRWY)
Picture
http://media.tumblr.com/4a71b7f342e91d0c641edc1b8cfd216f/tumblr_inline_moi2vxjgZR1qz4rgp.jpg (http://media.tumblr.com/4a71b7f342e91d0c641edc1b8cfd216f/tumblr_inline_moi2vxjgZR1qz4rgp.jpg)
The picture doesnt look as colorful for some reason but it looks to blend in VERY well, theres a part near the top of the tab where you cant really tell where my skin ends and the tab begins.
Im here to answer any and all questions about the emisil prosthetics
The video was extremely helpful. Are you able to wear it easily under clothes? Without a huge bulge..
The prosthetic does not buldge out at all and i wear skinny jeans normally. I personally wish that i had gotten the bigger model as i do like a slight bulge. I plan on purchasing an erect model from them later and hopefully that will give me the bulge i desire. This model though is very soft and comfortable to wear. Usually i really dislike large balls as they are uncomfortable to walk with, but with this prosthetic i just forget that i am wearing it. its very comfortable. My bio-male friend examined it and felt it and was amazed at how close to the real thing that this prosthetic really is.
Also, there was a comment on the video about the back being lumpy and the texture being rough, i just wanted to give a bit of information. The back tab is not lumpy at all, i was showing how you can move the testicles inside the sac. As for the texture, yes it does look rough, but not a bad rough. It looks how real testicles look and it has skin pores, folds, creases, and what looks similar to hair follicles. Some people seem to think that a penis is completely smooth and has no texture, when in fact there are alot of different textures found in apenis. It was also hard to see in the video but when you pull and move the skin, it looks as real skin does.
This is something that i have not seen in the reelmagik prosthetics. They are nce looking, but dont have a wide variety of colors, and everything except the basic packer is very unproportional. They also are very bland in color with only one or two veins. Your genitals should not be the same color as the inside of your thigh, they should be slightly darker and gernerally with a reddish hue to them. The reel magik is very Light, even the darker skin tones are still very light. and are even one color until you reach the crest of the head. The emisil has a gradient of colors along the shaft.
Quote from: xaphroditesxapprenticex on June 16, 2013, 05:16:13 PM
The prosthetic does not buldge out at all and i wear skinny jeans normally. I personally wish that i had gotten the bigger model as i do like a slight bulge. I plan on purchasing an erect model from them later and hopefully that will give me the bulge i desire. This model though is very soft and comfortable to wear. Usually i really dislike large balls as they are uncomfortable to walk with, but with this prosthetic i just forget that i am wearing it. its very comfortable. My bio-male friend examined it and felt it and was amazed at how close to the real thing that this prosthetic really is.
Also, there was a comment on the video about the back being lumpy and the texture being rough, i just wanted to give a bit of information. The back tab is not lumpy at all, i was showing how you can move the testicles inside the sac. As for the texture, yes it does look rough, but not a bad rough. It looks how real testicles look and it has skin pores, folds, creases, and what looks similar to hair follicles. Some people seem to think that a penis is completely smooth and has no texture, when in fact there are alot of different textures found in a penis. It was also hard to see in the video but when you pull and move the skin, it looks as real skin does.
This is something that i have not seen in the reelmagik prosthetics. They are nce looking, but dont have a wide variety of colors, and everything except the basic packer is very unproportional. They also are very bland in color with only one or two veins. Your genitals should not be the same color as the inside of your thigh, they should be slightly darker and gernerally with a reddish hue to them. The reel magik is very Light, even the darker skin tones are still very light. and are even one color until you reach the crest of the head. The emisil has a gradient of colors along the shaft.
I just wanted to make a tiny comment about Reel Magik: Yes, they may seem unproportional (the 6in and 8in have very small testicles in comparison to the shaft, and the non 3D thing doesn't help this) and the colors are lighter than they appear on the website BUT they are not bland in color in person. They have tons of veins, both small and large, both textured and painted on. The smaller veins are painted on in each layer of silicone, with the finished effect being that they appear under the skin and they stretch when the skin is stretched very realistically. Up close, you can see that they do in fact have a color gradient down the shaft, as well as integrated freckles, moles, pores (mostly on the scrotum), mottling, etc. And this is on both light and dark tones. Not bland at all (at least for the advanced models). The 6in and 8in are rather smooth around the scrotum, but that's not unusual during erection. Same with the shaft lacking wrinkles. The skin-like texture is still there, though. It's not completely smooth at all.
However, I ONLY know this because I have seen the prosthetics in person at the Philly Trans Health Conference. I can see where xaphrodiesxapprenticex is coming from, because I wouldn't be able to tell from photos or videos, either. Then again, this is only my impression...maybe some other folks can way in, too?
Though this is the exact model I want to order from Emisil; I've been convinced to put in for it from this amazing review.
Quote from: Nowhereboi on June 16, 2013, 07:04:09 PM
I just wanted to make a tiny comment about Reel Magik: Yes, they may seem unproportional (the 6in and 8in have very small testicles in comparison to the shaft) and the colors are lighter than they appear on the website BUT they are not bland in color in person. They have tons of veins, both small and large, both textured and painted on. The smaller veins are painted on in each layer of silicone, with the finished effect being that they appear under the skin and they stretch when the skin is stretched, very realistically. Up close, you can see that they do in fact have a color gradient down the shaft, as well as integrated freckles, moles, pores (mostly on the scrotum), etc. And this is on both light and dark tones. The 6in and 8in are rather smooth around the scrotum, but that's not unusual during erection. Same with the shaft lacking wrinkles. The skin-like texture is still there, though. It's not completely smooth at all.
However, I ONLY know this because I have seen the prosthetics in person at the Philly Trans Health Conference. I can see where xaphrodiesxapprenticex is coming from, because I wouldn't be able to tell from photos or videos, either. Then again, this is only my impression...maybe some other folks can way in, too?
Though this is the exact model I want to order from Emisil; I've been convinced to put in for it from this amazing review.
I just want to point out that i am not by any means saying that reelmagik is a bad prosthetic. I am only comparing based on the photos and videos i have seen. I have been wanting to get my hands on a reel magik for some time to be able to make na accurate comparison. But just from their appearance in the photographs, emisil seems to be the higher quality. I really do wish i could have been at the philly conference for a number of reasons, reelmagik being one of them. Hopefully some day soon i will be able to accurately compare the two. I wonder if some one in Cali will let me just borrow their reelmagik penis for a moment haha. As for now, i can only speak with my experience of lolajake and emisil. Lolajake is nothing in compared to either the reelmagik or the emisil, even in just appearance.
Another thing about emisil that i find intreging is that they replicate human skin layers. So they have an "epidermis" "dermis" and "subcutaneous" layer to all of their prosthetics. This seems to be unique about these prosthetics.
Quote from: xaphroditesxapprenticex on June 16, 2013, 07:22:22 PM
I just want to point out that i am not by any means saying that reelmagik is a bad prosthetic. I am only comparing based on the photos and videos i have seen. I have been wanting to get my hands on a reel magik for some time to be able to make na accurate comparison. But just from their appearance in the photographs, emisil seems to be the higher quality. I really do wish i could have been at the philly conference for a number of reasons, reelmagik being one of them. Hopefully some day soon i will be able to accurately compare the two. I wonder if some one in Cali will let me just borrow their reelmagik penis for a moment haha. As for now, i can only speak with my experience of lolajake and emisil. Lolajake is nothing in compared to either the reelmagik or the emisil, even in just appearance.
Another thing about emisil that i find intreging is that they replicate human skin layers. So they have an "epidermis" "dermis" and "subcutaneous" layer to all of their prosthetics. This seems to be unique about these prosthetics.
I completely understand :)
It's not easy to really know until you can see and feel in person, and that's an expensive endeavor. I do know that the skin layers thing is done with RM, as well. You can feel them as the skin not only "lifts" when pinched but also the upper layers move up and down a slightly firmer inner core, which seems to wrap around an even firmer rod (in the case of the erect models). I'm assuming this isn't the case with Lola Jake?
I'd love to know more about the testicles on this prosthetic...how squeezable are they? I know that the one other review I've seen on Emisil, the reviewer mentioned that they were somewhat harder than he expected? Which made me really bummed out because that's part of what I'm looking for most...have you had this issue? They seem pretty soft from the video...
How is the size? How does it work in a harness?
Quote from: Nowhereboi on June 16, 2013, 08:26:14 PM
I'd love to know more about the testicles on this prosthetic...how squeezable are they? I know that the one other review I've seen on Emisil, the reviewer mentioned that they were somewhat harder than he expected? Which made me really bummed out because that's part of what I'm looking for most...have you had this issue? They seem pretty soft from the video...
How is the size? How does it work in a harness?
It does fit well in a harness. I have a simple elastic harness that fits it nicely.
As far as the testicles are concerned, the inner part is harder than i expected, but the outer part that they float in makes up for it. they move around very nicely and they are NOT uncomfortable even though they are firmer. Its kinda like if you wrapped a marble in a really thick layer of playdoh, the marble is still kinda hard, where as the playdoh around it is still soft and squishy enough. I personally dont have any issues with the testicles being firmer on the inside. I normally really hate testicles because they are hard and uncomfortable, but these move very nicely. The way the testicles are designed they kind of move back and forth with you as you walk (i tried to show that in the vid but im not sure how it showed)
Quote from: Nowhereboi on June 16, 2013, 07:31:13 PM
I completely understand :)
It's not easy to really know until you can see and feel in person, and that's an expensive endeavor. I do know that the skin layers thing is done with RM, as well. You can feel them as the skin not only "lifts" when pinched but also the upper layers move up and down a slightly firmer inner core, which seems to wrap around an even firmer rod (in the case of the erect models). I'm assuming this isn't the case with Lola Jake?
The layers of the Emisil definatly move around over an inner firmer layer. Im not sure how the erect model would be though. The lolajake supposedly has 2 layers but it doesnt feel at all like it does. it also doesnt feel soft, but more like dry dehydrated skin.
Thank you very much for your review xaphrodite (video and picture)
I really love my erect prosthetic, I recommand it !!! It looks like a real penis. You are right, you can feel 3 layers of the skin.
You wear your prosthetic with a harness, but I wondered about the glue. Does it hold ? To me, I want to wear it as natural as possible, no harness.
Can you make a try xaphrodite ? Your reviews are very important because I want to get a flaccid. But i want it to glue to my skin.
I add that the back of my erect prosthetic is more shiny than yours. But yours is shiny too. That's the reason why I wonder if glue can stay in place or not ?!?
I am purchasing some adhesive tomorrow and it should be here by the end of the week. i will then try the prosthetic with adhesive and post about it here.
Also, the tab is only shiny if light is put on it directly, it is not naturally shiny. Though i did notice that almost every proshtetic i have that is made to be used with medical adhesive is slightly shiny. This is because the silicone is very smooth so that the adhesive will stick better to your skin. I guess thats why lolajake has "tape liners".
I own a 6 inch reelmagik advanced model, bought it about a year ago, and now looking at the model 02 erect emisil prosthetic.
The reelmagik look amazing and feels great but for me the main problem is using it for sex. The rod does not allow the normal position of an erect penis, i.e against the body, but rather kind of sticks out facing downwards, making penetration slightly awkward. I also have the problem that a week after I got it the rod broke, reelmagik fixed it for free and were great about it but the rod is now quite weak and is very easily bent out of position with little resistance.
The model 02 erect from emisil however has that great curve to it which I think will be much easier to use, and seems to move a little more naturally, rather than RM rod clicking into different positions.
Only down side of the emisil seems to be lack of reviews and the fact that I don't think it sounds like I'm going to be able to adhere it to my body, and I feel quite dysphoric about using a harness. Does anyone know a good website for those sort of snug boxer pants that have the whole in the front to give a less obvious looking strap on function? Not sure if you guys know what I'm talking about but it's worth a go!
Anyway, if I decide to bite the bullet and purchase the model which I'm pretty sure I will, I'll happily write a review comparison. If you guys have any questions about the reelmagik having owned one and used it alot feel free to ask!
Quote from: Elliot on June 17, 2013, 05:01:15 AM
Only down side of the emisil seems to be lack of reviews and the fact that I don't think it sounds like I'm going to be able to adhere it to my body, and I feel quite dysphoric about using a harness. Does anyone know a good website for those sort of snug boxer pants that have the whole in the front to give a less obvious looking strap on function? Not sure if you guys know what I'm talking about but it's worth a go!
I don't know why you think you'll not be able to wear it in the same way as you did your Reelmagik, people have only been saying here that they haven't tried yet because they haven't got any adhesive, unless I've missed something?
Anyway, I think the boxers your thinking of are the Rodeohs. Their website is here http://www.rodeoh.com/shop.html (http://www.rodeoh.com/shop.html), but they're not the cheapest of things, about $45+ a pair. It is possible to make something yourself with just an O-ring, tight but stretchy underwear and some really basic sewing skills.
I have to say I am still not that impressed, especially after seeing the videos and photos of emisil, and using the reelmagik for so long. The emisil in the video just looks very unrefined...the back looks lumpy and shiny as if it were homemade (similar to what the ultimate prosthetics looked like). Most of the skin texture looks decent, but it really does not appear as amazing as some keep insisting. When you hold the reelmagik it bounces, swings and moves so realistically, and the emisil looks very stiff and unrealistic in it's movement. I posted this on the other topic, but my friend went to the trans conference in Philly and he said the new reelmagik prosthetics were just unbelievable, and everyone there was crowding around them and were in shock at the realism in look and feel. Another thing I noticed is that the back of the emisil is mainly flat, where the reelmagik is contoured to fit the shape of the body...and I think that's what helps keep them adhered.
I think the emisil might be a good option for those who can't afford something more expensive, but honestly I can see why there is a difference in price...the overall quality is noticeable between the two.
@Alexander : I have an erect prosthetic (ER02) from Emisil. I tried to glue it to my skin but it doesn't work. I said that maybe it would be because of my skin or shiny back of tab.
I want to have a flaccid one from Emisil, but I fear it doesn't glue to my body. Thank you xaphrodite to tell about your try. I can't wait for your review about engluing...
I do have a prosthetic from Tyron (Tyron2) and I can say that I can glue to my skin and it hold in place, really nice !
If flaccid prosthetic from Emisil can be glue to the skin, I will buy one for sure !
Quote from: bg83 on June 17, 2013, 11:02:52 AM
@Alexander : I have an erect prosthetic (ER02) from Emisil. I tried to glue it to my skin but it doesn't work. I said that maybe it would be because of my skin or shiny back of tab.
I want to have a flaccid one from Emisil, but I fear it doesn't glue to my body. Thank you xaphrodite to tell about your try. I can't wait for your review about engluing...
I do have a prosthetic from Tyron (Tyron2) and I can say that I can glue to my skin and it hold in place, really nice !
Oh right, sorry I must have missed that post from you. What adhesive are you using? I've heard of people having problems with some of the cheaper adhesives.
If it's possible could we have a review on the Tyron? I can't recall ever seeing a review before.
With pleasure !
Forst of all, I bought an Australian prosthetic (Dual with sacks). I was very disappointed : very heavy and didn't glue to my skin.
Then, I bought a Tyron 2 : nice touch and incredible from flaccid you pump your balls then you have an erect cock in a minute. I use Hollister Medical Adhesive 7730 and it stays in place. When I want to wear it when I go swimming or have all night long sexual intercourse, I use Xtra-strengh glue and it's fine !
I wanted to try a brand new erect prosthetic from Emisil. Prosthetic is great, I am very happy of it. I tried to glue it (exactly the same way as Tyron prosthetic) unfortunately it doesn't work. So I don't want to say that Emisil's prosthetics don't glue to skin. Mine doesn't glue to my skin with my glues. Maybe xaphrodite will be able to glue his prosthetic successfully !!
THen, I was so happy with TYron 2 that I bought his new prosthetic Tyron 3. It is very expensive, I am sure that it will work and I will be able to glue it to my skin !!!
Extra Strengh Adhesive BT 460 from factor2 (I bought it with Australian prosthetic) and use it with Tyron
Quote from: bg83 on June 17, 2013, 11:32:57 AM
With pleasure !
Forst of all, I bought an Australian prosthetic (Dual with sacks). I was very disappointed : very heavy and didn't glue to my skin.
Then, I bought a Tyron 2 : nice touch and incredible from flaccid you pump your balls then you have an erect cock in a minute. I use Hollister Medical Adhesive 7730 and it stays in place. When I want to wear it when I go swimming or have all night long sexual intercourse, I use Xtra-strengh glue and it's fine !
I wanted to try a brand new erect prosthetic from Emisil. Prosthetic is great, I am very happy of it. I tried to glue it (exactly the same way as Tyron prosthetic) unfortunately it doesn't work. So I don't want to say that Emisil's prosthetics don't glue to skin. Mine doesn't glue to my skin with my glues. Maybe xaphrodite will be able to glue his prosthetic successfully !!
THen, I was so happy with TYron 2 that I bought his new prosthetic Tyron 3. It is very expensive, I am sure that it will work and I will be able to glue it to my skin !!!
Oh man! I know we're asking a lot of you to submit reviews on your prosthetics out of the blue, but it would really be amazing if you would write a few words on your Tryon experience...I've never seen...well...any, actually. At least that weren't on the website. I think perhaps only a handful of people have them world-wide. A review for that would honestly be worth an entirely new thread.
Well, I am french, so please, excuse my poor english language...
Let me know what you want to know and I will be delighted to answer :)
Quote from: Codyboy1989 on June 17, 2013, 09:56:10 AM
I have to say I am still not that impressed, especially after seeing the videos and photos of emisil, and using the reelmagik for so long. The emisil in the video just looks very unrefined...the back looks lumpy and shiny as if it were homemade (similar to what the ultimate prosthetics looked like). Most of the skin texture looks decent, but it really does not appear as amazing as some keep insisting. When you hold the reelmagik it bounces, swings and moves so realistically, and the emisil looks very stiff and unrealistic in it's movement. I posted this on the other topic, but my friend went to the trans conference in Philly and he said the new reelmagik prosthetics were just unbelievable, and everyone there was crowding around them and were in shock at the realism in look and feel. Another thing I noticed is that the back of the emisil is mainly flat, where the reelmagik is contoured to fit the shape of the body...and I think that's what helps keep them adhered.
I think the emisil might be a good option for those who can't afford something more expensive, but honestly I can see why there is a difference in price...the overall quality is noticeable between the two.
As i have said a number of times, the back is NOT lumpy, i was rotating the testicles inside the sac to show how they moved. Also the tab is NOT naturally shiny. When it just sits there it isnt shiny, only when light hits it in a cetain way. Yes the back of the emisil is flat, but the softness of the tab(its a good type of soft, not weak but fleshy) allows it to contour to the body in any way that you want.
I am going to email RM about being a tester to see if i can get my hands on one of their new models their coming up with when it happens. Then i will be able to make an accurate comparison between the two instead of this "Well one looks like this and one looks like that" Even the Video of the emisil honestly didnt do the product justice, some of the coloration was not able to be seen.
Let me be very clear about this, the emisil prosthetic is very easy to move, it is not stiff. When you walk, it moves naturally with you, the balls move back in forth to match your steps, and the prosthetic sways nicely. The testicles inside the sac are a bit harder than i would have expected, but it does not by any means hinder the comfortability of the prosthetic.
Quote from: Codyboy1989 on June 17, 2013, 09:56:10 AM
I have to say I am still not that impressed, especially after seeing the videos and photos of emisil, and using the reelmagik for so long. The emisil in the video just looks very unrefined...the back looks lumpy and shiny as if it were homemade (similar to what the ultimate prosthetics looked like). Most of the skin texture looks decent, but it really does not appear as amazing as some keep insisting. When you hold the reelmagik it bounces, swings and moves so realistically, and the emisil looks very stiff and unrealistic in it's movement. I posted this on the other topic, but my friend went to the trans conference in Philly and he said the new reelmagik prosthetics were just unbelievable, and everyone there was crowding around them and were in shock at the realism in look and feel. Another thing I noticed is that the back of the emisil is mainly flat, where the reelmagik is contoured to fit the shape of the body...and I think that's what helps keep them adhered.
I think the emisil might be a good option for those who can't afford something more expensive, but honestly I can see why there is a difference in price...the overall quality is noticeable between the two.
Not for nothing, but I feel like you're taking this thread as a personal attack on ReelMagik, and getting offended at how much people like an alternative prosthetic isn't really grounds to attack the product that they like. You don't need to convince us that ReelMagik make great prosthetics; we already know that. The people in this thread are buying Emisil prosthetics for their
own reasons; either because they like the Emisil ones more, because they wanted a shorter manufacture time, or because they didn't have the budget for a ReelMagik prosthetic yet. Chill out a little and let people enjoy the things they've bought and loved; it doesn't devalue your love of ReelMagik in the slightest.
Quote from: Bane on June 18, 2013, 04:16:10 AM
Not for nothing, but I feel like you're taking this thread as a personal attack on ReelMagik, and getting offended at how much people like an alternative prosthetic isn't really grounds to attack the product that they like. You don't need to convince us that ReelMagik make great prosthetics; we already know that. The people in this thread are buying Emisil prosthetics for their own reasons; either because they like the Emisil ones more, because they wanted a shorter manufacture time, or because they didn't have the budget for a ReelMagik prosthetic yet. Chill out a little and let people enjoy the things they've bought and loved; it doesn't devalue your love of ReelMagik in the slightest.
I second this! Im not by any means saying that Reelmagik is a bad prosthetic, because god knows its beautiful in every way. I am just extremely impressed with Emisil, i did not think that they would be as good as they are. The community was asking for a review of emisil so i gave them what /i/ think of the product. I think its damn good. I think that its a wonderful option for people who may not be able to afford a ReelMagik. I also think that until someone ones both of them, then no one has the right to say which is actually better. And even then, that is just that persons opinion. There are going to be characteristics about both prosthetics that are liked and disliked.
I believe that emisil is a great competition for reelmagik though, and is going to give them a run for their money. Though reelmagik is an ever changing company that changes to fit the communities needs. Either way, it is good to have more than one useful option for prosthetics. Both companies provide flaccid and erect prosthetics that are hyper realistic. Some will favor emisil more than reelmagik and some will favor reelmagik more than emisil. Most of this will just come down to personal preference of which is better.
Emisil may be more of an option for people who are SUPER dysphoric about the color of their prosthetics, as they have a much wider color selection and if that STILL doesnt work, you can always have yours custom fit to your skin tones. They also have an uncircumsized model which is something that has been strongly desired by the community
Reelmagik does offer a nice basic packer though which may not be as detailed as some of these other prosthetics, but it much lower in price. They also will be providing 3-d testicles which is a feature that many people are looking for ( i personally kind of dont want because every experience with 3-d testicles that i have had has been uncomfortable.)
I agree with you xaphrodite. I don't have RM prosthetic but they seem to be good prosthetics. I bought Emisil because of the details of the prosthetic and the waiting time (shorter than RM)
Now, I am waiting for "xaphrodite" review when he will have made a try with the glue ;)
Can you post more pics ?
If you need more information about Erect prosthetic by Emisil or Tyron, I am here to answer your questions
Thank you again and again.
Quote from: bg83 on June 18, 2013, 12:22:02 PM
I agree with you xaphrodite. I don't have RM prosthetic but they seem to be good prosthetics. I bought Emisil because of the details of the prosthetic and the waiting time (shorter than RM)
Now, I am waiting for "xaphrodite" review when he will have made a try with the glue ;)
Can you post more pics ?
If you need more information about Erect prosthetic by Emisil or Tyron, I am here to answer your questions
Thank you again and again.
The adhesive shipped out yesterday so i should have it in the next couple of days. When i do get it i will post all sorts of pictures and such.
I'm really thankful that you're doing all this, xaphrodite! Like many here, I've been interested in the Emisil prosthetics, and I'm currently deciding whether I should start saving up for one or not.
In your video, I think the only problem that I saw was the "skin" under the penis, where it would rest when against the balls. I know it's probably not shiny in real life, but to me, it looked a little too "plasticky," if that's even a word. However, everything else looked really nice, especially the balls.
I'm a little curious about the FL05, though, as that's the one I want to purchase. I have to admit, the balls look a little too "young," but if they're realistic enough, I think I'll go for that one. otherwise, I might get your model.
Quote from: bg83 on June 18, 2013, 12:22:02 PM
I agree with you xaphrodite. I don't have RM prosthetic but they seem to be good prosthetics. I bought Emisil because of the details of the prosthetic and the waiting time (shorter than RM)
Now, I am waiting for "xaphrodite" review when he will have made a try with the glue ;)
Can you post more pics ?
If you need more information about Erect prosthetic by Emisil or Tyron, I am here to answer your questions
Thank you again and again.
Aha, I wasn't here to greet you when you first showed up on the thread, but bonjour/bonsoir, et bienvenue!
I would love to hear a Tyron3 review once you get it and try it out. To be honest, I'm not too impressed with how the product looks flaccid: I like it a lot more when erect. However, it sounds like it's a fairly good prosthetic. The little pleasure "knob" is definitely a plus, but I think it's a little too expensive for me. So, I guess a review describing how it feels in comparison with the Emisil products would help.
Quote from: VenomGaia on June 18, 2013, 04:23:07 PM
I'm really thankful that you're doing all this, xaphrodite! Like many here, I've been interested in the Emisil prosthetics, and I'm currently deciding whether I should start saving up for one or not.
In your video, I think the only problem that I saw was the "skin" under the penis, where it would rest when against the balls. I know it's probably not shiny in real life, but to me, it looked a little too "plasticky," if that's even a word. However, everything else looked really nice, especially the balls.
I'm a little curious about the FL05, though, as that's the one I want to purchase. I have to admit, the balls look a little too "young," but if they're realistic enough, I think I'll go for that one. otherwise, I might get your model.
Aha, I wasn't here to greet you when you first showed up on the thread, but bonjour/bonsoir, et bienvenue!
I would love to hear a Tyron3 review once you get it and try it out. To be honest, I'm not too impressed with how the product looks flaccid: I like it a lot more when erect. However, it sounds like it's a fairly good prosthetic. The little pleasure "knob" is definitely a plus, but I think it's a little too expensive for me. So, I guess a review describing how it feels in comparison with the Emisil products would help.
There really is no part of the prosthetic that is naturally shiny. It does shine slightly in certain lights, but when your just looking at it, theres nothing shiny at all! I took the video in my bathroom (its just the easiest place) and the light in there is one of those heat lights so it is VERY bright. The rest of my house is very dark so yea... its kind of a lose lose when it comes to videos.
Upon really close examination, there is only one vein which is a little close to the surface (though i have seen this on bio penises before so it doesnt bug me) the middle section of this vein, has a slight shine on the top of it. Other than that, the prosthetic does not shine. It looks just as real skin does
Also, i just wanted to let you all know that i emailed RM last night about being a tester for a prosthetic of theirs. They replied to me saying exactly this "Hello Alex,
We appreciate your interest in our products, and we are sorry you could not make it to the conference. We had a great time speaking with everyone, and will absolutely be attending again in the future. Perhaps we will see you there next time.
We also appreciate your offer to test and review our products. We often rely on our personal ftm friends for testing and suggestions, however we would appreciate the opportunity for others to provide feedback as well. If you could provide links to your website and/or reviews you have done, we would be happy to consider providing you with one of our products for review. We look forward to hearing back from you. Have a good evening.
The REELMAGIK Team"
So hopefully after they look over some of the other reviews i have done, they will let me be a tester so that i can give a proper review for both emisil and RM prosthetics.
Quote from: xaphroditesxapprenticex on June 18, 2013, 04:37:25 PM
Also, i just wanted to let you all know that i emailed RM last night about being a tester for a prosthetic of theirs. They replied to me saying exactly this "Hello Alex,
We appreciate your interest in our products, and we are sorry you could not make it to the conference. We had a great time speaking with everyone, and will absolutely be attending again in the future. Perhaps we will see you there next time.
We also appreciate your offer to test and review our products. We often rely on our personal ftm friends for testing and suggestions, however we would appreciate the opportunity for others to provide feedback as well. If you could provide links to your website and/or reviews you have done, we would be happy to consider providing you with one of our products for review. We look forward to hearing back from you. Have a good evening.
The REELMAGIK Team"
So hopefully after they look over some of the other reviews i have done, they will let me be a tester so that i can give a proper review for both emisil and RM prosthetics.
This is amazing! You're reviews are great, so I can't imagine why they'd turn you down based on your work, so I'm calling this a "win". I can't wait to see the review.
Hey guys...just a quick note about these prosthetics from emisil. I, like others have been curious as to why they are charging so much less than other prosthetic companies for their products (FTM Prosthetics: $700-$1400, RM: $500-$900). As it turns out, the currency exchange rate is ridiculously high in their favor...$400 american dollars is equal to $1040.00 in their currency, so they are actually profiting much more and simply have an advantage due to the exchange rates. U.S. companies can't compete with this, which is a shame...we'll end up losing out in the end with fewer options to choose from:(
If a company made a three in one packer that was realistic i'd pay any amount of money they asked me for. The exchange rate works in our favor in this case. If local soil steps up there game i'll pay them the $1000 usd instead. That's how I see it anyways. I may have missed this at some point in this delightfully long thread but did someone mention Emisil was looking into an stp option?
Just letting you all know that my adhesive cam in the mail yesterday, but all my mail gets sent to my friends house so i dont have it with me at the moment but i will in a few hours and then i will test it out and by the end of the day i will post a review of how it works and such. I will admit now that i did go kind of cheap on the adhesive. I went with a totally different brand called "pros aide". Although i have never heard of it used in the trans* community, it is a very reputable silicone prosthetic adhesive so i dont really see a reason for it not to work haha.
Quote from: xaphroditesxapprenticex on June 20, 2013, 08:48:35 AM
Just letting you all know that my adhesive cam in the mail yesterday, but all my mail gets sent to my friends house so i dont have it with me at the moment but i will in a few hours and then i will test it out and by the end of the day i will post a review of how it works and such. I will admit now that i did go kind of cheap on the adhesive. I went with a totally different brand called "pros aide". Although i have never heard of it used in the trans* community, it is a very reputable silicone prosthetic adhesive so i dont really see a reason for it not to work haha.
I was just about to try that on my prosthetic! I have some left over from a cosplay and was wondering it could be a good prosthetic adhesive. I do know that it does not work on cyberskin (I tried it as a sealant for my recolored Sailor; it peeled and stuck to everything), but silicone might work.
Quote from: Codyboy1989 on June 19, 2013, 04:51:36 PMAs it turns out, the currency exchange rate is ridiculously high in their favor...$400 american dollars is equal to $1040.00 in their currency, so they are actually profiting much more and simply have an advantage due to the exchange rates.
You've
got to be kidding me.
Googling '400 USD in LTL' doesn't bring you back another number in USD, it brings you back a number in LTL. Now, this might have escaped you, but that is a
different currency, and no longer USD, which means you can't put a dollar sign in front of it and claim that the new number is equal to that amount in the US. Just because 400 USD is 1040 LTL, that doesn't mean they miraculously get more money out of the equasion; that's not how currency exchange rates work. They're based on the economy, and while they can help us get things a little cheaper every now and then, they're often very even. Say a loaf of bread cost 2 USD, that same loaf of bread will likely cost 5 LTL. Stop scrounging for reasons to hate them; it's ridiculous and an insult to the company and people who believe in them.
To my knowledge you only benefit from the exchange rate if you travel to the country, have money exchanged and then have the money exchanged back. I believe it's where I lost a bit of money in traveling to the UK. Even so, it was worth it. Mailing something you wouldn't because you are just buying something that costs a certain amt and you will be using the type of dollars used in X country. I think that the credit cards do the transactions, they charge a fee for this. Anything you gain, is probably made up by the postage which will be very high.
$1000 US dollars is NOT equal to 1000 LTLs. $1000 is equal to about $2631 LTLs (today anyway). The exchange rate changes by the day.
These things cost whatever they cost. So that in one country they would cost more to make because of the price of certain goods, etc. in that country. I don't think anybody but Ultimate prosthetics is making that much money on this deal (because he doesn't deliver). Silicone is tricky to deal with and the learning curve is exceptionally steep. I would bet everybody is working out of their house. I think RM has the three employees they sent to Philly Trans health and that Emisil has one.
I think they are mid-range cost prosthetics. May have more to do with the amt of silicone than anything, tbh. They simply aren't as expensive to make. I don't even think FTM prosthetics is making some kind of killing. BTW, aren't they in Germany or something?
You can figure out the exchange rate by googling say: 100 USD=?Eur
Figuring out your advantage or disadvantage is far harder.
--Jay
Quote from: Bastian on June 19, 2013, 06:28:20 PM
If a company made a three in one packer that was realistic i'd pay any amount of money they asked me for.
Word.
I noticed that as well, but assumed that they just didn't realise the dollar sign can't be used for anything other than dollars, the Australians and other people use the dollar sign as well after all, and there's not a Lithuanian Litas button on the keyboard.
Anyway, I thought it would be interesting to compare, so, according to Google, a flaccid 4.5" Reelmagik will set you back either $500 or Lt1306. A similar flaccid Emisil (FL02) would set you back either $134 or Lt350. And actually things are a lot cheaper to buy in Lithuania, which could contribute to cheaper materials costs or something, I don't know. Strangely though, the mean monthly salary, as of June '13 is $3,200.00 in America and the equivalent of $673.28 in Lithuania. They're both in US dollars for comparisons sake there btw. And don't foregt there's shipping (and customs) charges on top of those.
At any rate, they're both still good prosthetics, and of course, some people are going to prefer one over the other, just like everything else in life. For a long time Reelmagik were one of the only companies who were putting out good prosthetics at a half affordable price. How many people actually have the money to buy an FTM Prosthetic, or a Tyron, especially when they're not that many reviews on them around (or any). Yes, Reelmagik are being undercut by Emisil, but that doesn't mean you have to buy from them. That doesn't mean that Reelmagik are going to disappear, because they still have income from their other half of their business as well coming in and the expensive part, the moulds are already made. That doesn't mean that anyone has to buy an Emisil. If you don't like the Emisils, then pretend they don't exist and safe up for a Reelmagik, that's what you'd have had to do if Emisil weren't out there.
Competition is never a bad thing if you want products to improve, and Emisil are filling a niche in the market by offering prosthetics with foreskins. Lets wait for someone to actually have their hands on both before we're trying to decide which is better based off of their prices, because that doesn't necessarily mean anything.
Okay lads, I'm sorry for this being so late but i finally got a chance to sit down. I've got some good news and some bad news and then some, just news.
Bad news-
Apparently amazon gave me the wrong adhesive. It was advertised as "pros aide" but was infact generic adhesive made for things like body glitter and fabrics such as my boxers.
Good news-
Even with this extremely weak adhesive, the prosthetic did stick a little bit. After shaving, applying to my skin, letting sit a few minutes, then putting the prosthetic on, and holding for a few min. The Emilio prosthetic managed to stay on about 15 minutes with some walking around the house and then fell off. It looked amazing for the brief time it was on. It blended in fairly well, and unless you've got a high def camera up close, you can't even tell it was attached!
Again, I got the WRONG CRAPPY ADHESIVE. And it STILL worked, so I don't see any reason why it wouldn't work just fine with legitamit adhesive.
News-
I absolutely adore my prosthetic, but I know that some people might like it even more than I do. So I am either going to do one of two things with it, sell it, or trade it with someone who has an erect prosthetic ( a fancy one like RM or Emisil) but has more need for a flaccid prosthetic. This thing is gorgeous, but I am in much more need of an erect prosthetic, so I am looking for solutions to this.
It's here, and review is up!
I wanted to do an absolute 'first impressions' review, so I filmed this almost as soon as I got it. Also, this video breaks my three year youtube silence, so I hope you guys appreciate it! I tried to cover everything, especially the flex rod for you the unknown. If anyone has any questions, please just ask. :)
Emisil Prosthetic Review - ERO2SO3 (http://www.youtube.com/watch?v=An56v_0a0Nw#)
I might take some pictures later if I can find a good camera, to show the detail a little better. :)
@Bane : did you try to glue it ? Let us know about your experience !!!!
I have the same erect prosthetic as you. Mine is color S09 :)
@xaphrodite : thank you for your review !! I hope you will get a good glue for your prosthetic !!
@bg83 and bane: how "firm" would you rate the testicles? Is there anything in terms of feel (such as another packer) that you could compare them to? In terms of general...er...squeezability?
Hahaha, you go right for the hard question Nowhereboi! The testicles themselves don't squeeze at all, they're just hard balls. The sack around them is just as soft as the rest of the prosthetic, but because the balls are so large and tight in place, you can't squish it to get them to move all that much. Maybe the best way to put it is that they don't feel like they're floating in gel; they just feel like hard balls around which the rest of the prosthetic was poured, and the soft give of the silicone skin moves around them. Hope that helps. :)
And bg83, sadly I don't have any adhesive yet! As soon as I get some and try it out though, I'll let you know. :)
Quote from: xaphroditesxapprenticex on June 16, 2013, 02:19:35 PM
So i decided that pictures would not do this model any justice, so i took a magical video of it! Here is a video that shows the prosthetic up close. I have also added a picture of the prosthetic on so that you can see how the color match is and how it looks.
Video
http://www.youtube.com/embed/AncVP5muRWY (http://www.youtube.com/embed/AncVP5muRWY)
Picture
http://media.tumblr.com/4a71b7f342e91d0c641edc1b8cfd216f/tumblr_inline_moi2vxjgZR1qz4rgp.jpg (http://media.tumblr.com/4a71b7f342e91d0c641edc1b8cfd216f/tumblr_inline_moi2vxjgZR1qz4rgp.jpg)
The picture doesnt look as colorful for some reason but it looks to blend in VERY well, theres a part near the top of the tab where you cant really tell where my skin ends and the tab begins.
Im here to answer any and all questions about the emisil prosthetics
@xaphroditesxapprenticex
Hey man! Thanks for doing this review! I just have a few questions.
1) What color skin tone did you get? Sorry if you said it and I missed it. I'm just really afraid of getting the wrong color for myself. As of right now I'm going to get S06. I'm thinking that will be dark enough for what I want but not too dark. I'm pretty pale but want something darkish for my junk.
2) How "flaccid" is this model? I know some people have said that Reelmagik's old basic packer used to be kinda hard. Maybe even as hard as a half-erection? How does this shaft compare? Is it completely flaccid or if someone rubbed it, with a hand or body, might it feel a little "aroused". Personally I'm worried about getting a flaccid one and then getting into something sexual and not even being able to have him rub it with his hand until I *finish* or perform oral on it. I wouldn't be too pleased with having my partner basically perform oral sex on a completely flaccid penis and I'm sure he wouldn't be either lol! :P
Do you think I could get away with wearing it for some minor sexual activity? Hand, oral, or even just dry humping??? Sorry for the awkward question but I just have to know lol!
Great review Bane, you've got me sold on Emisil. Now I await a stp flaccid version =)
Quote from: Tyler90210 on June 21, 2013, 08:39:40 AM
@xaphroditesxapprenticex
Hey man! Thanks for doing this review! I just have a few questions.
1) What color skin tone did you get? Sorry if you said it and I missed it. I'm just really afraid of getting the wrong color for myself. As of right now I'm going to get S06. I'm thinking that will be dark enough for what I want but not too dark. I'm pretty pale but want something darkish for my junk.
2) How "flaccid" is this model? I know some people have said that Reelmagik's old basic packer used to be kinda hard. Maybe even as hard as a half-erection? How does this shaft compare? Is it completely flaccid or if someone rubbed it, with a hand or body, might it feel a little "aroused". Personally I'm worried about getting a flaccid one and then getting into something sexual and not even being able to have him rub it with his hand until I *finish* or perform oral on it. I wouldn't be too pleased with having my partner basically perform oral sex on a completely flaccid penis and I'm sure he wouldn't be either lol! :P
Do you think I could get away with wearing it for some minor sexual activity? Hand, oral, or even just dry humping??? Sorry for the awkward question but I just have to know lol!
1)as I've said before I did NOT get one of their pre-determined colors, I emailed them a picture of my arm and had them custom match it to that(no additional fee).
2) this is a pretty flaccid penis, just a simple graze won't give away a partially erect feeling. But it's nothing like a mr limpy or something that's basically liquid. I'm sure that if you wanted it would work fine for oral or hand sexual avctivites. My girlfriend likes to give a good rub now and then even if I'm wearing a softer penis ( like Emisil or my gecko). But I wouldn't say that it feels erect in any sense of the matter. It /could/ work in a pinch for oral or hand, but no type of penetration at all.
Hope that helps.
Quote from: xaphroditesxapprenticex on June 21, 2013, 11:20:51 PM
1)as I've said before I did NOT get one of their pre-determined colors, I emailed them a picture of my arm and had them custom match it to that(no additional fee).
2) this is a pretty flaccid penis, just a simple graze won't give away a partially erect feeling. But it's nothing like a mr limpy or something that's basically liquid. I'm sure that if you wanted it would work fine for oral or hand sexual avctivites. My girlfriend likes to give a good rub now and then even if I'm wearing a softer penis ( like Emisil or my gecko). But I wouldn't say that it feels erect in any sense of the matter. It /could/ work in a pinch for oral or hand, but no type of penetration at all.
Hope that helps.
Hey. Thanks! Yes you really did help a lot. :) I'm still torn on getting a flaccid vs. erect though lol. :P
Quote from: Bane on June 21, 2013, 02:49:00 AM
Hahaha, you go right for the hard question Nowhereboi! The testicles themselves don't squeeze at all, they're just hard balls. The sack around them is just as soft as the rest of the prosthetic, but because the balls are so large and tight in place, you can't squish it to get them to move all that much. Maybe the best way to put it is that they don't feel like they're floating in gel; they just feel like hard balls around which the rest of the prosthetic was poured, and the soft give of the silicone skin moves around them. Hope that helps. :)
And bg83, sadly I don't have any adhesive yet! As soon as I get some and try it out though, I'll let you know. :)
@Bane
Hey, I just have a few questions if you don't mind.
1) How hard is their erect model? Would you say if someone touched it through soft very tight jeans/pants, even girl pants (I like my jeans super tight lol), would it always feel like you have a boner? Or would the outer softer skin layers mask that?
2) I'm guessing if they squeezed or rubbed it would feel erect; but what about an accidental graze at like a bar or something?
3) How about if someone sat on your lap? Would it always feel like you were very happy to have them there lol? :laugh:
Hey Tyler90210, let's see how well I can sum these questions up:
1) It feels hard in any pants.
2) It's very hard.
3) No seriously, it's SUPER HARD!
All joking aside though, this is a fairly big concern for me. There is no way it will pass even the most casual of grazes; it just has zero give in pants and the soft squish from the skin is barely noticable under clothes. :/
Thanks Bane, that was something I was wondering about as well. It's a shame it won't work for double use but at least it will make it's intended use more intense ;)
Don't get me wrong Bastian, it packs away in pants very well! It only makes a small bulge in pants when tucked away between the legs, it just won't stand a touch test. :P
Quote from: Bane on June 20, 2013, 11:59:46 PM
It's here, and review is up!
I wanted to do an absolute 'first impressions' review, so I filmed this almost as soon as I got it. Also, this video breaks my three year youtube silence, so I hope you guys appreciate it! I tried to cover everything, especially the flex rod for you the unknown. If anyone has any questions, please just ask. :)
Emisil Prosthetic Review - ERO2SO3 (http://www.youtube.com/watch?v=An56v_0a0Nw#)
I might take some pictures later if I can find a good camera, to show the detail a little better. :)
Your review was FANTASTIC! Thank you so much!
@xarphrodite : when will you get the right glue ? ;)
Quote from: bg83 on June 24, 2013, 01:23:40 PM
@xarphrodite : when will you get the right glue ? ;)
I have to wait a little bit before buying more glue, but probably within a week or two. Sorry it's not sooner :(
Another thumbs up worthy review.
--Jay
Thanks guys! Also, please don't misunderstand me; this prosthetic is freaking amazing for packing. It makes a smaller bulge than my mr limpy or Peacock gen 2, and looks awesome in pants, it's just the feel that won't quite pass a grope. :)
Don't wear it in gay bars.
--Jay
Haha, what aleon515 said! :{P
Hi guys !!
Any news from you who bought an emisil flaccid prosthetic ?
Can't wait for your reviews.
I am still waiting for your reviews about glueing... before I buy one ;)
Quote from: bg83 on July 04, 2013, 05:26:22 AM
Hi guys !!
Any news from you who bought an emisil flaccid prosthetic ?
Can't wait for your reviews.
I am still waiting for your reviews about glueing... before I buy one ;)
I already posted my review and my thoughts about adhesive. Ypu might have just missed it.
Hello !
Yes I already read it. And thank you very much for the review ;)
You said that you would buy a new glue in a week so I thought that you had try it with your flaccid prosthetic. I believe you have no time to buy one for the moment.
Sorry for double post :)
I have sold my erect prosthetic from emisil because I can't glue it to my skin with all kind of glues. Very disappointed by this...
Not all the adhesives are good or even fair. My understanding is that the best adhesive is the Reel Magik extra strength.
--Jay
Thank you aleon515 for your answer :)
Well, I loved my erect02 from Emisil, unfortunately, I sold it. It didn't glue to my skin.
I am still very interested in flaccid from emisil, but I also fear tab doesn't glue with x-strengh glue.
I am waiting for reviews with a real good glue.
Does any guys have bought flaccid from emisil ? (not xaphrodite, I know you have it ;))
Now, I am waiting for my tyron3. Can't wait for it ;D I should get it in mid- August.
Be sure I will make a review as soon as I get it ;)
Hi guys !!
I did it ! I have been waiting for a long time, then I ordered a flaccid from Emisil.
I will get it in 4-5 weeks
Quote from: bg83 on July 19, 2013, 03:46:25 AM
Hi guys !!
I did it ! I have been waiting for a long time, then I ordered a flaccid from Emisil.
I will get it in 4-5 weeks
Which one did you get? :D
I ordered Flaccid 03. I hope it will stay in play with glue !
I really love my emisil. Though i am looking to get an erect model. S just as a heads up, i will be selling my emisil, or looking to trade it with someone. So if you, or someone you know, is interested. Hit me up xD
So my model 02 erect emisil prosthetic arrived today. I'm in the UK and ordered about 3 weeks ago, 3 days ago I got an email of shipment and it arrived this morning, very impressive service!
Having not really tried it out yet (including adhesive which I'm pretty pessimistic about) I'm actually really pleased with it. I have a 6inch RM prosthetic and was ripped off in the whole 'ultimate prosthetic scam' so I wasn't really expecting much from emisil at such a lower price, but I'm pleasantly surprised! It feels really great and the rod is brilliant, the erection is MUCH more natural than the RM. There is a slight compromise though in that the skin just isn't as realistic looking or feeling as RM. It has a slightly more sticky silicone feel (though I'm sure there's stuff I can do to sort that out) and the attention to detail isn't as good. Having said that if I didn't own a RM I'd be very very pleased by it's aesthetics.
So if anyone has any questions with regards to ordering or comparison to RM I'd be happy to help!
Quote from: xaphroditesxapprenticex on July 25, 2013, 08:53:59 PM
I really love my emisil. Though i am looking to get an erect model. S just as a heads up, i will be selling my emisil, or looking to trade it with someone. So if you, or someone you know, is interested. Hit me up xD
I just might take you up on that offer.
Elliot, it's been some time now...Have you had a chance to try it out a bit more? Possibly with any adhesive?
Quote from: VenomGaia on August 06, 2013, 07:20:58 AM
I just might take you up on that offer.
Elliot, it's been some time now...Have you had a chance to try it out a bit more? Possibly with any adhesive?
The selling or the trading? If youd like to discuss it please email me at schsgsapres@yahoo.com
I just received my prosthetic today. It is very realistic in my opinion although I cannot compare it to a RM because I don't have an RM. I ordered it on July 20th and it was shipped August 7. Took about 9 days to get to me and I'm from the New England area. While I think it would be amazing for sex, I just can't figure out how to pack it without it looking like I have a hard on. I haven't ordered adhesive yet so I haven't been able to glue it to my skin or whatever but I'm just trying to figure out how to shape it in order to fit in my pants better so that I could wear it more often than not. Has anyone figured it out?
Edit: Emisil also has an STP available with a rod option. Just thought I'd let everyone know. It is the ER05 Model.
ER05 says nothing about STP and states that it has a hole in it with a 2 inch opening reducing to 5/8 inch at the tip. That is HUGE
Quote from: LordKAT on August 16, 2013, 03:18:13 PM
ER05 says nothing about STP and states that it has a hole in it with a 2 inch opening reducing to 5/8 inch at the tip. That is HUGE
It doesn't say anything specifically about it but I would imagine that it could be used as an STP.
I can pack my erect model by bending the shaft right down over the balls (be firm with it!) and between my legs. It feels bulky, but it barely shows in my pants at all; I actually pull it out a bit to create a bulge most of the time. :{P
Quote from: Bane on August 18, 2013, 03:46:23 AM
I can pack my erect model by bending the shaft right down over the balls (be firm with it!) and between my legs. It feels bulky, but it barely shows in my pants at all; I actually pull it out a bit to create a bulge most of the time. :{P
Do you use adhesive or no? If so, what kind?
No, I can't find one that won't cost a fortune to ship to Australia. :( If anyone could suggest one I'd be very grateful.
Quote from: LordKAT on August 16, 2013, 03:18:13 PM
ER05 says nothing about STP and states that it has a hole in it with a 2 inch opening reducing to 5/8 inch at the tip. That is HUGE
Well...I'm guessing back up won't be much of a problem.
That would totally depend on the tubing and receptacle used.
The ER05 model isnt supposed to be for sale to the general public. It is reserved for a specific customer as it is designed specifically for him. They probably have it on display to show you what they can do with it.
Quote from: Bane on August 18, 2013, 10:48:42 PM
No, I can't find one that won't cost a fortune to ship to Australia. :( If anyone could suggest one I'd be very grateful.
Bane- I just ordered the extra strength from Reelmagik. I'll let you know how that works out. I ordered that one because I haven't heard good things about Hollister adhesive because I think it may just be too heavy so I decided to go all out on this one.
looks pretty decent... super expensive (for me at least)
Its also pretty annoying that none of links in the FAQ do anything. There are countless "click here"'s that don't go anywhere.
Thanks Kenton, please do let me know how that goes. :)
I'm afraid to report I've tried it with both the Hollister adhesive and the reelmagik extra strong, and it just doesn't adhere. I really wanted it to believe me I tried every way I could think of! So I think tbh I'm just gonna stick with my RM, which is a shame because the erection on the emisil is so much more realistic, but if I can't adhere that's a massive thing for me. For guys who don't mind extra layers or strap-on's or whatever it'll be great, but for me it's just not compatible with what I want in a prosthetic.
If you have any questions about it in comparison to RM I'll be happy to answer them.
Quote from: Elliot on September 01, 2013, 05:37:28 PM
I'm afraid to report I've tried it with both the Hollister adhesive and the reelmagik extra strong, and it just doesn't adhere. I really wanted it to believe me I tried every way I could think of! So I think tbh I'm just gonna stick with my RM, which is a shame because the erection on the emisil is so much more realistic, but if I can't adhere that's a massive thing for me. For guys who don't mind extra layers or strap-on's or whatever it'll be great, but for me it's just not compatible with what I want in a prosthetic.
If you have any questions about it in comparison to RM I'll be happy to answer them.
From what ive experienced this seems to just be an issue with the erect model. I have a flaccid model and with generic crappy adhesive it stuck a little bit. I havent had the chance to use any other adhesives yet so i cant say for absolute certain. It seems that the erect model is shinier on the back than the flaccid.
Are you interested in getting rid of your erect model since you cant get it to work the way you wanted?
Does anyone have any updates on the use of their Emisil? I still haven't used mine because I'm not really sure how to go about it. It is just sitting in the package with some reelmagik extra strength glue. Turns out I haven't needed it thus far which is disappointing.
I just received my Emisil ER04, I've made a picture album here:
http://imgur.com/a/tJMrS#0
For questions, please send some asks at http://maxi-nezhi.tumblr.com/ :)
Hi guys !
I sold my erect one. I was very disappointed. It had never adhere to my body...
Has anyone had success with the erect model adhering to your body? I am on the verge of buying one and would like to get some insight on the glue and if anyone has been successful with sex.
I just bought an erect model from someone selling theirs, ill give a full review of it when it arrives (any day now!)
Quote from: Alex55 on October 22, 2013, 08:06:59 PM
Has anyone had success with the erect model adhering to your body? I am on the verge of buying one and would like to get some insight on the glue and if anyone has been successful with sex.
I genuinly don't think it's possible to adhere the erect model to your body, it weighs too much, the tab is too thick and not the right finish. The prosthetic looks good, and the rod is awesome, it just won't adhere. So I guess if you're happy to have sex with a harness it'll work fine?
I know that this post is old but I'm on the verge of ordering a emisil prosthetic and was looking into a glue that may work. Has anyone else thought about ordering the tape kit from lola jake and adhering that way?
Also the levamentum project. Just released a 3 in 1 packee costing about 50 bucks. Many sizes going up to a 8 inches.well anywho they sell the flexrod stp tubing for like 20 bucks. You can choose many sizes and stp receptacles but I figure I'd share if you guys hadn't heard.
Well I inquried to emisil and sinthetics about sending the stp flexrod in and emisil said they could mold my prosthetic using the stp flexrod in it. Now if I can figure out a good way to get it to adhere, I'd have a 3 in 1 with asthetics that attaches with no extra straps, no insertion of a rod or changing packers to pee, no multiple packers. Since the guys at rm don't do custom orders I have to go with emisil. They seem like a grear option but adhering to the skin and no more straps or harness would be perfect.
The tape kit from lolajake would probably work. Lolajake has some pretty hefty packers, but they adhere just fine, i believe this is because of the liner. So i think adding the liner would also make the emisil work out just fine.
Also, just for like some info, the paint on my erect model had worn off VERY easily, so i contacted emisil to ask if there was anything i could do. THey said this was really weird, and told me(just a few hours after i emailed them) to send it back to them and they would diagnose the issue and then send me a new one. Which is awesome! What is even more awesome is that i did not buy it directly from them, but they just didnt even care. Its their product and they want it to last.
These guys have great customer service!
-Alex
Well hopefully that is a solution for guys who already have them and find not adhering the only flaw. Im pretty sure I'm going to order the tape kit when I order my prosthetic. I'll post a extended review with my adhering experience and my custom stp flexrod experiences.
I'm really disappointed to read about the Emisil not sticking. I think they look more realistic than the ReelMagik and I also like the fact that you can achieve the "upwards curvature" with the Emisil that you can't with ReelMagik. Has anyone given Emisil feedback regarding the fact that their prosthetics will not adhere to the skin?
hello,
I am curious about the functioning of the erect model of emisil during sex.
I understand some of you had tried,so..... how is it? does it stand well and firm? did you get any feedback from your spouse?
Quote from: maor on January 16, 2014, 01:52:46 PM
hello,
I am curious about the functioning of the erect model of emisil during sex.
I understand some of you had tried,so..... how is it? does it stand well and firm? did you get any feedback from your spouse?
My girlfriend is just about as in love with it as i am. She says its the best one yet, and its pretty much the real thing. It does not bend awkwadly in the middle of things as some other have, but it does have the proper "bounce" as an erect penis has. She loves that the tip is slightly softer than the shaft, so its great for teasing the both of us ;). I havent tried my new model with adhesive, but i have no problems using a harness. And it has no problem staying in place and being perfect haha.
If you have any other questions feel free to PM me and ill share as much as i can.
hi,
thank you so much for your replay :)
so you two are happy with emisil, great! tempting... I'm definitely thinking of buying one...
another question (unfortunately I'm having some technical problems so I cannot sent you a PM...):
can I put the emisil into a Rodeho underwear?
which harness do you have?
sorry if my questions are too personal...
again - thank you for sharing!
bg83,
Did your flaccid model adhere with the glue? I don't want to order until I get a firm yes from someone on this question.
kenton_07,
You didn't say where yours was an erect model or not, but you mentioned sex, so I assume it is an erect model. I assume it did not adhere?
maxinezhi,
Did your erect model adhere? I read your link as saying the reviews indicated that erects don't adhere, but you have not said if you tried it yourself.
Just a FYI for everyone, Emisil's website says that a harness (but he called it a "strap on", )needs to be worn for erect, but that the flaccid should adhere.
Quote from: Brett on April 04, 2014, 07:49:06 PM
Just a FYI for everyone, Emisil's website says that a harness (but he called it a "strap on", )needs to be worn for erect, but that the flaccid should adhere.
Ugh, that's just unacceptable for me. Surely someone out there can create one that adheres and can stay put during sex!
Hi Brett,
I bought an erect and a flaccid from Emisil. Both of them have never adhere to my skin. I sold erect one and I still have flaccid one (I never wear it). I've tried to glue them with Xtra Strengh glue.
In my point of view, I am very disappointed by these prosthetics, because I thought they could be glued to my body.
I am waiting for Kreutzfidel review. I'd likde to know if they have changed their shiny tab. By the way, there are no good pics of the back of the tab ?!!!
Quote from: bg83 on April 05, 2014, 05:35:49 AM
I am waiting for Kreutzfidel review. I'd likde to know if they have changed their shiny tab. By the way, there are no good pics of the back of the tab ?!!!
I'm not reviewing them because I'm not purchasing their product until they can develop something that actually adheres to the skin.
Quote from: bg83 on April 05, 2014, 05:21:45 AM
Hi Brett,
I bought an erect and a flaccid from Emisil. Both of them have never adhere to my skin. I sold erect one and I still have flaccid one (I never wear it). I've tried to glue them with Xtra Strengh glue.
In my point of view, I am very disappointed by these prosthetics, because I thought they could be glued to my body.
bg83,
Thank you for responding. Some questions about the
flaccid1) What brand of Xtra Strength glue did you use?
2) Is this the same glue that you use for your Tyron 2 (that you said worked)?
3) In case there has been a change in how Emisil is making the flaccid, I would like to know what month/year you bought the product (I don't want to scroll back to find it).
I really would love this prosthetic to work, so I want to be absolutely certain there is NO chance that it won't adhere. :-)
Also
4) Is it possible to just wear it like you do any packer where you just put it into a jock strap? I am actually considering ordering just for that. I could cut off the tab, maybe?
Thanks again!
Hi Brett,
About flaccid :
Well in 2006, I bought australian prosthetic large dual (expensive and very disappointed) with xtra strengh glue (from factor 2). I've been using this glue with emisil flaccid.I tried to make it adhere to my skin by all the ways. It doesn't work for me. I ordered flaccid from emisil on August 2013. Tab is shiny and doesn't adhere to my skin. Let me know if they have changed their products. When I bought mine, there was about 5 kind of flaccid prosthetics. Why is there only 2 prosthetic now ?
Well, for me, it is very difficult to wear it as any packer (mr limpy) because of the tab (i believe it is too thick). I did exactly what you wanna do : cut the tab. There was some kind of gel inside which went out from the prosthetic. To my mind, this prosthetic is too expensive to cut the tab. In this case, I advise you to buy something cheaper (mr limpy). How would you wear the prosthetic if you cut the tab ?
Actually, I wear underwear with mr limpy and it works great.
I use the same (old) glue with my tyron 2. It works perfectly during intersex (no strap on). I am sorry i never write big reviews about tyron prosthetic because I am french and I don't speak english very fluently.
Regards,
bg83
bg, what you just typed is more fluent than some Americans.
bg,
Thank you so very much for being so thorough and answering all my questions, especially since you are not confident about your communication in English.
I had no difficulties in understanding you.
I was thinking of buying it even if I had to cut the tab because I very much like how it looks and would like something more realistic than the Mr. Limpy. Do you think that if you had not cut the tab as close to the shaft that the gel may not have come out?
Would it be awkward to put the packer in a jock strap with the tab still attached? I suppose the tab would lean forward and not stay against your body. It is just so disappointing.
I wish you would consider a review on Tyron. So many people are interested in it and you really do write fine. If you are so happy with the Tyron, why did you look to buy something else?
Hi Brett,
I am glad you can understand my english. I am a frenchy ;)
Well, I believe you can cut the tab, but it is difficult to know where the gel is. Well gel is firm so I believe you can cut the tab. You are right, Emisil flaccid is more realistic than Mr Limpy when you watch it. Though, Emisil is firmer than limpy but you can feel 3 silicone layers. It is compact to wear it. I wish emisil flaccid would be less firm but the same skin layers. This is my advice.
How would you wear it ?
I believe you can put the packer in a jock strap with the tab still attached. But I don't know if you would feel at ease with it because of the tab that would lean forward and not stay against your body.
Did they change the tab ? Does it really adhere to the body ?
For those who buy new ones, which flaccid model did you choose ?
I am very happy with Tyron3 and don't want to buy anything else than Tyron prosthetics. I want to buy flaccid from Tyron but it is expensive so I have to wait for it. I come here because I like to help people with my experience. We are all different, we don't have the same way to use prosthetic, to enjoy it. Prosthetics are our "intimate genitals", it is important for us and expensive. All over the world, I believe it is very important to share informations so I try to help.
I spent so much money : australian prosthetic (large dual), emisil erect then flaccid and Tyron3.
I found what prosthetic I wanted. I agree Tyron prosthetic is very expensive and need more realistic features. Tyron says these prosthetics are prototypes and when we buy his prosthetics, he spend this money to improve new one.
I hope I helped :)
I can try to make tyron review but I need questions to answer you. So yes, send me questions about tyron and I will answer it so that it will be some kind of review.
I can see emisil never show the back of the tab. For those who want to buy one (erect or flaccid). Before ordering, I advise you to ask them to send you a picture of the back of the tab. You will check if the back is shiny or not (let us know about the picture)
I remind you that realmagik and tyron haven't a shiny back of the tab.
Quote from: Brett on April 04, 2014, 07:49:06 PM
bg83,
Did your flaccid model adhere with the glue? I don't want to order until I get a firm yes from someone on this question.
kenton_07,
You didn't say where yours was an erect model or not, but you mentioned sex, so I assume it is an erect model. I assume it did not adhere?
maxinezhi,
Did your erect model adhere? I read your link as saying the reviews indicated that erects don't adhere, but you have not said if you tried it yourself.
Just a FYI for everyone, Emisil's website says that a harness (but he called it a "strap on", )needs to be worn for erect, but that the flaccid should adhere.
I did get the erect model and adhesive but I still have not used it at all. I'm actually not sure if I will ever use it to be honest since I am in the process of scheduling phalloplasty.
Quote from: Elliot on July 26, 2013, 06:21:42 PM
So my model 02 erect emisil prosthetic arrived today. I'm in the UK and ordered about 3 weeks ago, 3 days ago I got an email of shipment and it arrived this morning, very impressive service!
Having not really tried it out yet (including adhesive which I'm pretty pessimistic about) I'm actually really pleased with it. I have a 6inch RM prosthetic and was ripped off in the whole 'ultimate prosthetic scam' so I wasn't really expecting much from emisil at such a lower price, but I'm pleasantly surprised! It feels really great and the rod is brilliant, the erection is MUCH more natural than the RM. There is a slight compromise though in that the skin just isn't as realistic looking or feeling as RM. It has a slightly more sticky silicone feel (though I'm sure there's stuff I can do to sort that out) and the attention to detail isn't as good. Having said that if I didn't own a RM I'd be very very pleased by it's aesthetics.
So if anyone has any questions with regards to ordering or comparison to RM I'd be happy to help!
Does it look real ? Do you use harness or only ues glue ? Sorry my english not good :/9