You make a good point Yossarian!

Sorry I guess it was the 'labour' cost comment that got to me. As an artist it's infuriating when people are like 'why does this cost so much?' and I have to explain to them that it takes 6 hours to make and by paying me my asking price you're paying me only $9-$10 bucks an hour.

Sorry 'bout that. Essentially yeah, if someone's asked for a custom packer and Emisil said "ok" that just makes me love them so much more because they are willing to go through all the trouble of re-sculpting, re-molding and re-casting their product. Such it's going to cost more, they pretty much have to re-design the entire piece but the thing is they are willing to do it. That's a point for them from me.

I personally have only ever considered spending more than a grand on one prosthetic and that was the Tyron Phase 2. Now that that ship has sunk thanks to the 'grand reveal' of the Tyron 3 i'd prefer to put closer to half that money towards a flaccid and erect since we can't have both in one. I personally can't stand the RM so it's off the table for me. I really hope Emisil and Sinthetic check out and produce good products.

Also want to point out that the custom packer isn't justcause's only option, the other two erect penis' have 3d testicles already so if you are hesitant about the price of the custom you could always go with the cheaper one that already has testes and then decide if you like them enough to tack on more money.

Ah, I understand where you're coming from. I didn't take all that into consideration.

Correct me if I'm wrong but the thing about Justcause is he wanted the flaccid 03 since it's uncut. They don't offer uncut erects.

I would be more willing to purchase an erect if they had one that was. I agree with him that prosthetics shouldn't come flat back. I guess to me it just doesn't make much sense. I think they'd have a real chance if they were to provide them since no one else really does.

Quote from: Yossarian on February 26, 2013, 07:00:40 PM
I'm very interested in knowing why the cost doubled. They aren't the only company I noticed this happens with.

If you go to RM and look at their basic packer and then at the basic prosthetic the only two differences are the flex rod and the tab. Why do those two things make the prosthetic $400 more?

Either those flex rods are expensive as hell or they're really milking the "labor" costs.

I may not have been clear in what I said. (I also did not read the comments between yours and mine, so someone may've already cleared this up!)

I inquired about the s03 prosthetic. This model is one of their flaccid uncut models that has a flat back on the scrotum.  The 'flat-back' scrotums seem sort of archaic to me so I asked if they had plans to upgrade this model to a 3d scrotum (as opposed to flat-back). They said "no" but that if I wanted that done they could do it for a fee. (Which is great that they are even willing to do this)

I am not sure the exact process but I know it has something to do with making a new mold. So the price increase makes sense.  It is also them going out of their way to do it.

I do wonder if there is a more Frankenstein method of just melting a prosthetic knob and bullocks together. But alas, I know nothing of this industry.

The cost doesn't bother me. My hold up is no custom colour options.

Quote from: Bastian on February 26, 2013, 10:58:12 PM

Also want to point out that the custom packer isn't justcause's only option, the other two erect penis' have 3d testicles already so if you are hesitant about the price of the custom you could always go with the cheaper one that already has testes and then decide if you like them enough to tack on more money.

Ok, I never said I had a concern about the price. 
The only reason I posted was to let people know they are active in responding to questions cause everyone seems to be throwing stones at them when they've done absolutely none wrong.

Also, I don't want an "erect" dick.  the s03 prosthetic I inquired about is a flaccid uncut model with a flat-backed scrotum.  I wanted to know if they had plans to offer a 3d version of it.

For future reference guys the S numbers refer to colors, H numbers for hair, the numbers by themselves indicate which of the series in FL or ER, you're looking for.

So if you ordered a FL02 S14 H01. You'd be asking for a Flaccid 02 with Brown(S14) skin and black (H01) hair.

I don't think we're necessarily throwing stones. It's just with TUP scamming people and those customer reviews that turned out to be fake, everyone is on edge.

I wish they weren't in a different time zone. I have to wait until about 2 AM  before I receive their emails.

So I asked Emisil for their address and they replied.

"Penis prosthetics are made in Lithuania. Lithuania is European Union Member."

ADDRESS:
Guobu 49
LT-52316 Kaunas
Lithuania

Other address where we are located is in Germany.
Neuendickstrasse 15b
47475 Kamp-Lintfort
Germany

They were even kind enough to throw in a map lol.

Quote from: RagingShadow on February 15, 2013, 12:13:06 AM
sent them an email asking for a vid showing testicle and skin movement. will let ya know about their reply. I think the flaccid 2 looks alot like the 4.5 RM, and i like the uncircumcised number 5, but I am not sure about the balls on that one. they almost look prepubescent...

the balls do look pre pubescent

Quote from: justcause on February 26, 2013, 11:58:59 PM
Ok, I never said I had a concern about the price. 
The only reason I posted was to let people know they are active in responding to questions cause everyone seems to be throwing stones at them when they've done absolutely none wrong.

Also, I don't want an "erect" dick.  the s03 prosthetic I inquired about is a flaccid uncut model with a flat-backed scrotum.  I wanted to know if they had plans to offer a 3d version of it.

Fair enough, I misinterpreted your post, my apologies. I thought you were talking about the erect s03 prosthetic. I agree that the flaccid uncut one would be great with 3D balls, as while less ftm's will be interested in that model in general, there are people, such as yourself that would very much like to purchase it since it's not really offered anywhere else.

Sorry for the misunderstanding.

So far I'm getting the message that this company is legitimate, responds quickly and politely to emails, and has a speedy production time (evidenced by the prosthetic someone asked to be made), and is open to feedback and change. I'd say that all up things are looking great for Emisil! :3

I agree. I really like this company. A lack of funds is the only reason why I haven't already ordered from them. That, and I'm waiting on my Sinthetics.

I placed my order officially yesterday morning. Now I get to play the waiting game.

Quote from: Bastian on February 27, 2013, 12:12:01 PM
Fair enough, I misinterpreted your post, my apologies. I thought you were talking about the erect s03 prosthetic. I agree that the flaccid uncut one would be great with 3D balls, as while less ftm's will be interested in that model in general, there are people, such as yourself that would very much like to purchase it since it's not really offered anywhere else.

Sorry for the misunderstanding.

I've only just properly read through this after coming back off holiday, but the number 05's balls look pretty 3D to me. Hard to see with it sitting down though.

I'm thinking the FL05 only appears that way because it rounds into a flat and isn't just "clean cut" like the others.

Hi guys,
I ordered from Emisil an erect penis prosthetic. They said they would send it on friday and they did.
I am waiting for it.
And yes, they are in Lithuania 

Yeah, they shipped mine out this morning as well. Just as they told me they would. Seems like Emisil is batting a thousand.

It'll take about a week to a fortnight to get here so we'll see.

So it came today. There were no issues and I'm really excited to try it out. I'll come back with my reviews in a few days. I want to give it a full run before I form a complete opinion on it.

Quote from: Yossarian on March 19, 2013, 03:20:50 PM
So it came today. There were no issues and I'm really excited to try it out. I'll come back with my reviews in a few days. I want to give it a full run before I form a complete opinion on it.

awesome! can't wait for this! if you are willing to, post pictures and everything with your review.

Will do.

Go here for the text review

Vide review