Hi All -

I have been waiting a while to post this for a couple of reasons.  But, it is time.  I purchased a prosthetic from DJ at www.CompleteMan2013.com.  Let me first say that DJ is a great guy.  He has really done everything he could to make my prosthetic work for me.  In time, I hope to either do a video review or post some pictures but for now I am in a situation (staying at the In-Laws) where privacy and the opportunity to do so is limited so I will start with this written review. 

First and foremost - this is a prosthetic penis - it is not a packer.  It is the closest thing to a real penis that I have seen yet.  He offers three different models -
1) Basic  - The basic model is smaller (3-4 inches) and is used for daily wear and STP.
2) Standard - The standard model is bigger (4-5+ inches) and is a 3 in 1 - used for daily wear, STP and play.
3) Ultimate - The ultimate is the same as the standard only bigger, up to 6 inches or so.

I have the Standard model.  For me, the thing that really set this prosthetic apart from the others was the movable skin.  Mine is (I am guessing at these measurements) around 4 inches flaccid and almost 6 inches with the erection rod.  That's right - it grows  .  When I say the skin moves, I don't mean that it moves a little bit where you can pinch it and pull it up a little, I mean it moves very much like the skin of a CIS male penis moves.  The skin also feels like skin! 

So, how does it pack?  Well, I don't really consider it packing.  I wear it in the same position as a CIS male would hang.  I can tuck the shaft back inside the skin or I can let it hang, depending on what pants I am wearing.  The balls are also very life like.  Inside the scrotum you can move the balls into any position that feels right. 

Play - now I can't really tell you how well this works.  DJ has reported that most wives are blown away with the realism of it.  As far as SELF play - I can vouch for that!  It's a wonder I get anything done LOL.  The erection rod is made with a very nice area for your T-Dick to experience pleasure too. 

STP - The STP receptacle is made on the end of the inner shaft.  As you pull the skin forward (making the shaft shorter) the receptacle is more exposed at the other end.  It did take some practice to get this right, but I think that is the case with any new STP.  In fact, when I first got it the receptacle was too wide, or short, or something and I just could NOT get it to work.  DJ did his magic and reshaped it - now it works like it should. 

I know it is a little hard to picture all of this, and the pictures on his website don't tell the whole story either.  Again, I hope to be able to post some pictures - someday.  The entire prosthetic is carefully crafted of many layers of medical grade silicone.  My only ?complaint? would be that mine has more girth to it than I would really like.  BUT, he can build them to the size you prefer.

DJ is a Trans guy that was in search of a solution and taught himself how to create these works of art and decided to share his talent to help other guys.  He does all of the work himself and thus it does take some time to create each masterpiece.  He estimates 12 weeks production time. 

Again, I really do hope to add pictures someday - but I don't know when that might be. 

EDIT -  Not sure how to do this, but I did take some pics when I first got it.  I uploaded them to ingr so I'll try posting a link to that album.  If that doesn't work, I will come back later and try something else.  http://imgur.com/a/ohgn8#hNUq3y3

I have this prosthetic as well. Though the problem for me is that I can't have anything like this close to my skin. Sadly. Which is why I have gone more back to packers.  I did a review on youtube, which you can get to thru his website. He is a super nice guy. I do not recommend the extra large receptacle, btw. I think it's just too big. I am sort of a flunky STP user, but it works about 90% for me. Practice in the shower and YMMV.

The skin moves like foreskin, and also the ball sac has testicles (actually much like implants you can feel inside. I just have the Basic model. But yes, the Standard model the shaft actually "grows" about an inch.

It's very light compared to Reel Magik, maybe about a 1/3 the weight.


--Jay

0,o!!! It grows? And the balls are not flat back....*sigh* Just when I thought I had made a choice the options just keep coming. Thanks for the pics and the input.

What size "spoon" is that in the pic?

It's not flat back at all. I think you are asking JandJ the size of the receptacle because I have the extra large one. (I don't know if it's a cup or a bevel or what, he's changed this.) . I also have close ups of the prosthetic. (Oh boy has my voice gone down!) This was over a year ago, so the comments about him not doing them for anyone else is not valid.

http://completeman2013.com/photo-gallery.html  (It's about 5 minutes in.)
(I'd suggest seeing full screen, so you can see details better.)

--Jay

I will try to get some more pics of the STP end of thing.  My 'spoon' was way too big and DJ made it smaller.  He offers different sizes.  I would guess, in that pic it was probably considered XL. Now it is probably large or medium.  I would NOT suggest the large, but I am not large! I am a small guy so it's all probably a bit on the large size for me, but I guess you would now say I am well hung LOL.

Quote from: aleon515 on January 04, 2015, 01:15:06 AM
It's not flat back at all. I think you are asking JandJ the size of the receptacle because I have the extra large one. (I don't know if it's a cup or a bevel or what, he's changed this.) . I also have close ups of the prosthetic. (Oh boy has my voice gone down!) This was over a year ago, so the comments about him not doing them for anyone else is not valid.

http://completeman2013.com/photo-gallery.html  (It's about 5 minutes in.)
(I'd suggest seeing full screen, so you can see details better.)

--Jay

Yes, I was comparing them and trying to clarify for my understanding. I have watched your video several times to try and gain a better understanding of the product. I wish he went into more detail about the colors b/c the codes for them make no sense to me. I will just email him. What color did you get? I recall in the video you stated it was on the light side. Personally, I could live with my "staff and jingles" being a shade or two darker.

Quote from: JandJ on January 04, 2015, 09:51:40 AM
I will try to get some more pics of the STP end of thing.  My 'spoon' was way too big and DJ made it smaller.  He offers different sizes.  I would guess, in that pic it was probably considered XL. Now it is probably large or medium.  I would NOT suggest the large, but I am not large! I am a small guy so it's all probably a bit on the large size for me, but I guess you would now say I am well hung LOL.

Now when you say you are not large could you explain your body type and height? I hope that is not too personal, you are welcome not to answer. I am just trying to gain a better grip on how the measurements will playout in my pants for the long run. Don't get me wrong, who does not wan to walk around like "What up, I got a big c@c*" but at some point having a dick print be...cumbersome.  Also, what color did you get? Compared to the TSW it looks much more realistic.

This is a general question for the both of you. In the vid Aleon pointed out that the "business end" of the product has a smaller that usual hole. Have either of you found that this causes back flow? Of course one will have to practice and learn how to use it but is it save to assume that leaking is a strong possibility  due to back flow?

I got the second or third one he ever made to sell, so there were some problems. He cut an opening larger and so on. I would think he'd have that problem settled by now. I'm not sure how many he has made at this point. I didn't have problems after he cut the hole larger. (Btw, he used a small razor sharp scissors. So not particularly high tech or fancy.) So since he did this, I had no problems with back ups or anything. I think it works pretty well (not as well for me as a Pstyle or Sneekee).


I am here locally. He came over to my house to match me, so I have no idea. If you want I could ask. I would suppose he could help you from photos. He won't make it unless he talks to you. If you look at the order page, he has "when can I call you". So he expects to talk with you. There are at least 2-3 guys who got their products from him on susan's. I hope maybe they join the conversation.

No, I don't think it's too light. I think it varies in color is what I said. So some parts are lighter and some parts darker. That's like normal skin pigmentation. I'd say he matched me more or less perfectly, but then had the advantage of being here (Albuquerque).

BTW, I'd say mine was girthy right off. It's to accommodate the rather large STP arrangement. I am able to pack okay with mine (though I haven't tried to adhere). Due to the really large STP it doesn't really work well for packing though. I find the STP kind of gets in the way. It doesn't work great in a jockstrap. I can do it, but not really well, and to be fair it was never designed to be worn that way. Also a tab doesn't work too well in a harness. This is all way I've gone back to wearing a packer. But size wise, mine is about 3.5"-3.75" long.

He makes a "new STP" arrangement. I don't know if it's on his page. But it looks very good/interesting like it would work very well. You might ask about this one. I was actually going to see if he'd make me one (minus prosthetic) and test this out.

Full disclosure. We go to the same support group and so on. I wouldn't say we are buddy buddy or anything like that. We don't have that much in common. But he is another somewhat older guy in the same group. I got to know him more when he made my prosthetic.




--Jay

To answer your question PaperShips - both Jay and I are small guys.  Before starting T, I had to shop in the BOYS section.  Since starting T I can now wear mens Small clothes.  I am 5'4" and now topping the scales higher than the day I gave birth to my son at 137#!  (I was 108# before starting T!)

I just added some more pictures to the Imgr folder.  Now, for my disclosure - I begged DJ to sell me a 'scratch & dent' model because I was not going to be in town 12 weeks for him to make me a custom one.  That is why I ended up with a bigger one than I would have ordered.  He can make it to what ever size you want - as long as you know what you want

ALSO, DJ told me that he is using different materials than when he made Jay's.  Mine is NOT light at all.  I do not have a ReelMagik to compare to, but mine is heavy.  I can't imagine the ReelMagik being any heavier.  Mine had a couple of defects and did not pass inspection to be sold.  The head is harder than it should be and there was a leak that had to be repaired - we are still working out some issues - which is one of the reasons I did  not review it earlier.  It is not completely fair to compare mine to a new one because it is an imperfect piece.  However, DJ has been very good (so far) in doing everything reasonable to make it work for me. 

I will NEVER ask for a 'scratch & dent' model for a prosthetic again!  I have learned my lesson.  I have had to take it back to him more than once for him to attempt to repair the leak.  BUT - that should NOT be an issue for anyone buying a new one.  DJ will stand behind his product - thus the reason I feel OK leaving my review.  I have not seen another that the skin moves the way it does on his - nor have I seen one that actually grows with erection!  I have not had many in my hands to compare to, but this one feels very real to the touch. 

I'm a smaller guy at 5'1". I can only wear men's clothes from a store like H&M.
I heard tell he was using different materials. Not sure why as I have no complaints re: materials.

--Jay

I got a prosthetic from DJ too. He really is an amazing guy to work with. There were some issues with my prosthetic and he had some health issues that affected the timeline, so he included a free basic prosthetic when he shipped the one I ordered.

I've been meaning to do a review, but things have been busy. So for now I'll just put a plug in here. I got the ultimate at 5". It's incredible. The coloring is realistic, the skin is movable, and it feels great. I probably should have gotten a smaller size, but that's on me. He tried to talk me down but I didn't listen. That being said, it still packs really well. It's a little more difficult to pack with sometimes, but most of the time I just have a larger bulge. Might just be me being self-conscious, though.

As for the STP, It's hit or miss with me. Sometimes I get it, sometimes I don't. I think I just need more practice. It's mainly positioning it just right. Once it's in the right spot, I don't really have to control the flow or anything. When I first got it, the hole was a little small. I decided to do a little "surgery" on it and made it a little bigger. You gotta be really careful, though. It probably wasn't the best idea for me to do it myself. It's a miracle that I didn't damage it.

DJ worked with me on every issue that came up. We sent it back and forth for a few things and he never charged me extra. He really cares about us guys and wants us to get exactly what we need.

I'll try to remember to do a fuller review later. If anyone wants pictures, feel free to ask.

Quote from: Aiden In Progress on January 04, 2015, 04:00:07 PM
As for the STP, It's hit or miss with me. Sometimes I get it, sometimes I don't. I think I just need more practice. It's mainly positioning it just right. Once it's in the right spot, I don't really have to control the flow or anything. When I first got it, the hole was a little small. I decided to do a little "surgery" on it and made it a little bigger. You gotta be really careful, though. It probably wasn't the best idea for me to do it myself. It's a miracle that I didn't damage it.

I can agree with that!  It must be glued at the right position or you will have a mess!  My tendency was to place it to high - when it is placed correctly it now works fine.  I'm still trying to find a way to STP one handed though!  When I was using a SheWee I could STP one handed and never a miss but since I started using anything that looks more realistic it seems that hands in underwear is the only way to insure no leaks 

I believe since I have not adhered it, my comments on how good the STP are are well let's say maybe less reliable. I believe the comment on how accurately you place it is correct. Of course, we are actually talking several different STPs. I think the one on mine, resembles a very large funnel/cup (I compared with the Fenis) is very different than JandJ's. The new one is a very interesting design, but now forgot exactly what it looks like. Though the idea of holding it inside the underwear doesn't sound too odd. Nobody's going to really notice.

He's a very caring guy. He also has helped me out. I had after a year or so, developed some little holes in the back. He took it (free) and sealed it back up. Also 10% of the purchase goes to a transgender resource center.


--Jay

Quote from: aleon515 on January 05, 2015, 01:37:24 AM
I believe since I have not adhered it, my comments on how good the STP are are well let's say maybe less reliable. I believe the comment on how accurately you place it is correct. Of course, we are actually talking several different STPs. I think the one on mine, resembles a very large funnel/cup (I compared with the Fenis) is very different than JandJ's. The new one is a very interesting design, but now forgot exactly what it looks like. Though the idea of holding it inside the underwear doesn't sound too odd. Nobody's going to really notice.

He's a very caring guy. He also has helped me out. I had after a year or so, developed some little holes in the back. He took it (free) and sealed it back up. Also 10% of the purchase goes to a transgender resource center.


--Jay

Is the stp option DJ offers similar to the shewee? That is the current stp I use. It is great and all but I think I am gaining growth so my seal is not as tight.

JandJ & Aleon, thanks for sharing your thoughts and body with me. I am on the large side;just under 5ft8in, a bit over 290lbs and I have broad shoulders. I am able to pack the Mr.Right with little to no issue so perhaps I should lean towards the middle size. *shrug* When I have all the funds I will talk it over with DJ. I am rather curious about how he will color match me.

Quote from: JandJ on January 04, 2015, 04:34:06 PM
I can agree with that!  It must be glued at the right position or you will have a mess!  My tendency was to place it to high - when it is placed correctly it now works fine.  I'm still trying to find a way to STP one handed though!  When I was using a SheWee I could STP one handed and never a miss but since I started using anything that looks more realistic it seems that hands in underwear is the only way to insure no leaks 

Pictures!! Pictures!!
Thanks for adding your input.

JandJ, I am not gonna lie. Your other pictures made me scream like a little girl. I am really ok with that. Thank you for adding more, this is really cool. I wonder if DJ could add hair...another questions to email. FWah!

Quote from: PaperShips on January 05, 2015, 09:25:57 PM
JandJ, I am not gonna lie. Your other pictures made me scream like a little girl. I am really ok with that. Thank you for adding more, this is really cool. I wonder if DJ could add hair...another questions to email. FWah!

You are welcome PaperShips ☺️  Just an FYI - I talked to DJ today and he is planning to raise his prices very soon.  He (of course) will honor the current prices for any orders placed before the change is made.  I do not know if he would consider doing hair or not.  Send him a message and ask - he is very receptive to suggestions and very easy to talk to.  If you leave him a phone number, I'm sure he will call you.  And yes, it is REALLY cool!  I can't really show the feel via pics or video but it feels real!

ALSO - I couldn't edit my post above, but I had DJ weigh mine this morning and he said it was just under 10 ounces